North Ayrshire · Scotland
Bath Repair in Largs
We travel to Largs for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Chips caused by builders
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
How we handle bath repair in Largs
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Our repair technicians work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and people most often call us about damage beneath the taps and impact holes in acrylic.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Largs (KA30)
- Region
- North Ayrshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Largs: your questions answered
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you come to Largs?
We do. We send a technician to Largs for every job, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you cover the entire of North Ayrshire?
We work UK-wide, and that includes Largs. Our prices are the same everywhere.
What affects the price in Largs
Prices start from £95. Every quote is fixed and free. What we look at:
- How much damage there is
- Doing more than one item at once
- What the surface is made of
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- The material, if you know it
- A wider photo showing the whole bath
- A clear, close picture of the problem area
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Largs, and we will reply with a fixed price.
Covering Largs
Largs is about 11 miles south of Greenock, in North Ayrshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Largs is one of 53 places in North Ayrshire where we work. Our nearest city page is Glasgow, about 23 miles away.
All of KA30 is within our area. Streets in the area include Main Street, Harper Crescent and Middleton Drive, and we cover them all. With the A78 and A760 close by, Largs is simple for us to get to. Neighbouring places we cover include Fairlie (3 miles south), Millport (4 miles south-west), Skelmorlie (5 miles north), Wemyss Bay (6 miles north) and Toward (7 miles north-west). Within a short drive, we also cover Irvine (15 miles south-east), Kilwinning (12 miles south-east), Saltcoats (11 miles south), Ardrossan (10 miles south), Stevenston (12 miles south) and Kilbirnie (7 miles south-east). As one of the bigger places in North Ayrshire, Largs sees plenty of our work.
Around Largs
We visit homes around The Paddle Steamer pub, Largs Academy and Largs Campus. Largs has its own railway station: Largs station. Further afield, we also cover the area around Kelburn Castle (1.9 miles south) and Brooksby House (under half a mile north-west).
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. Allow a few hours, depending on the damage, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Nearby places to Largs
Also in Largs
Common problems we fix in Largs
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
You may need us if you’ve spotted:
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
- Damage beneath the taps
What to look for in a quote
- Whether the price covers travel
- What prep work is covered
- Whether the colour is mixed to match
- How soon you can use it again
Repairing versus replacing in Largs
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Largs customers choose us
- One visit for most repairs
- A fixed quote before booking
- Honest advice, even when it means no job
- A year’s guarantee on all work
Read our full price list and resurfacing vs replacement cost guide.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
