Highland · Scotland
Bath Repair for Ardersier homes
Bath repair in and around Ardersier: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Damage beneath the taps
- Damage done while the bathroom was being fitted
What a repair cannot fix
To be straight with you, there are a few things a repair will not fix:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Bath repair in Ardersier, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on acrylic, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are a kit repair that didn’t last and impact holes in acrylic.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Ardersier (IV2)
- County
- Highland
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How we price bath repair
Repairs from £95. There is no area surcharge for Ardersier. The price reflects:
- The colour and finish to match
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- Natural light rather than flash
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
More services for Ardersier
Signs you need bath repair in Ardersier
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People normally call us after spotting something like this:
- Chips on the rim or sides
- Holes from dropped items
- Damage beneath the taps
- Rust by the waste and overflow
What to look for in a quote
- What preparation is included
- If travel is included in the price
- How long it needs to cure
- How the room is protected while they work
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a few hours in most cases. The room is left tidy.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Landlords, agents and businesses in Ardersier
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Covering Ardersier
Ardersier is about 6 miles west of Nairn, in Highland. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Ardersier is one of 253 places in Highland we cover.
We cover every part of IV2. Whether you live on Station Road, High Street and Cameron Drive or a nearby road, a technician can come to you. Close by, we cover Croy (3 miles south), Rosemarkie (3 miles north-west), Fortrose (4 miles west), Avoch (5 miles west) and Cawdor (5 miles east). Further out, we also cover Inverness (10 miles south-west), Nairn (6 miles east), Cradlehall (7 miles south-west), Merkinch (10 miles south-west), Dingwall (15 miles west) and Hilton (10 miles south-west). Some remote addresses need extra planning, so call us to arrange it.
Near you in Ardersier
Our clients here include homes close to Ardersier, among other places. Ardersier’s nearest station is Inverness Airport station, roughly 2.3 miles south. Further afield, we also cover the area around Highland Aviation Museum (2.1 miles south-west) and Chanonry of Ross (3.7 miles west). Green spaces nearby include Loch of the Clans and Fairy Glen.
Ardersier questions
Which areas do you work in?
Everywhere in the UK, Ardersier included. There’s no extra charge for travel.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How much does bath repair cost in Ardersier?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your IV2 postcode.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
