Highland · Scotland
Bath chip & crack repair in Croy, Highland
Damaged bath in Croy? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
About our bath repair in Croy
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Typical jobs include damage beneath the taps and a hole punched through by something heavy, in cast iron enamel, whirlpool & spa baths and acrylic.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Croy (IV2)
- Area hub
- Highland
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Questions from Croy
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Do you come to Croy?
Yes. We cover the whole UK and travel to Croy and the rest of Highland. Send photos and we will quote, or call 0345 017 0787.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Highland.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Rooms protected and left tidy
- One price list for the entire UK
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and resurfacing vs replacement cost guide.
Honest limits
A few problems are outside what a surface repair can do:
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
The process
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours. Before we go, we’ll explain how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
Ask for a price
If you’re in Croy and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Where we work around Croy
Croy is about 7 miles south-west of Nairn, in Highland. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Croy is one of 253 towns and villages in Highland where we work.
We work across IV2. We regularly work on streets such as Fraser Lane, MacKinnon Drive and Miller Road. Other places close to Croy include Newlands of Culloden (3 miles south-west), Ardersier (3 miles north), Balloch (4 miles south-west), Viewhill (4 miles south-west) and Cawdor (4 miles east). Further out, we also cover Inverness (9 miles south-west), Nairn (7 miles north-east), Cradlehall (5 miles south-west), Merkinch (9 miles west), Hilton (8 miles south-west) and Alness (15 miles north-west). If you’re somewhere remote, ring us first and we’ll plan the trip.
What’s near Croy
Our customers here include homes close to Croy Parish Church Of Scotland and the streets around them. Croy’s nearest station is Inverness Airport station, roughly 1.8 miles north-west. Other landmarks nearby include Highland Aviation Museum (2.5 miles north-west) and Kilravock Castle (1.2 miles east). For a walk, there’s Loch of the Clans.
Keeping it looking good
To keep it looking its best for years:
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Also in Croy
What affects the price in Croy
Prices start from £95. You will not pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- The material
- The size and number of damaged areas
- The colour and finish to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Details of any past repairs
- A coin beside the damage so we can judge size
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
