County Armagh · Northern Ireland
Bath chip & crack repair in Armagh, County Armagh
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Armagh and across County Armagh. Send pictures for a free, fixed quote.
- Repairs from £95
- Impact holes in acrylic
- A kit repair that didn’t last
How we handle bath repair in Armagh
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most often call us about chips along the edge of the bath and scratches you can feel with a fingernail.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Armagh (BT61)
- Region
- County Armagh
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Make sure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
What we are called out for in Armagh
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted:
- Snagging damage from a refit
- Chips on the rim or sides
- A chip where the taps sit
- Rust by the waste and overflow
Comparing quotes
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether they match the colour on site
- Whether a trained technician does the job
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Also in Armagh
Landlords, agents and businesses in Armagh
If you manage property in Armagh, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
What affects the price in Armagh
Prices start from £95. There is no charge for travel to Armagh. The price comes down to:
- The colour and finish to match
- Where the damage is and how we get to it
- How much damage there is
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Where you are, by postcode
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Getting ready for the visit
- Open a window if you can
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Your questions about bath repair in Armagh
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What areas do you cover?
Everywhere in the UK, Armagh included. There is no extra charge for travel.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Our work in Armagh
Armagh is in County Armagh. We travel to homes and businesses in Armagh, so nothing has to leave your home.
Jobs in BT61 are booked in the same way as anywhere else. We also cover the places around Armagh: Portadown (7 miles north-east), Dungannon (11 miles north), Craigavon (11 miles north-east), Lurgan (13 miles north-east) and Banbridge (15 miles east). For island and remote addresses, ring us first and we will plan the trip.
Near you in Armagh
Around Armagh, we work in homes near St. Aidan's Church, Cardinal Tomás Ó Fiaich Memorial Library and Archive and City of Armagh High School, among other places. A little further out are Armagh County Museum (1.7 miles south-west) and St. Luke's Hospital (1.3 miles west). The countryside around Armagh includes Loughnashade.
About our accreditations · Every repair comes with a one-year guarantee.
