Cambridgeshire · England
Bath chip & crack repair in Arrington, Cambridgeshire
Damaged bath in Arrington? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
About our bath repair in Arrington
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include rust spots around the plughole and hairline or through cracks in acrylic, across cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Arrington (SG8)
- Region
- Cambridgeshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Landlord and trade work in Arrington
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Covering Arrington
Arrington is about 6 miles north of Royston, in Cambridgeshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Arrington is one of 371 towns and villages in Cambridgeshire we cover. You can also see our page for London, about 44 miles away.
All of SG8 is covered. From Ermine Way, Church Lane and Clifden Close or anywhere nearby, we can come to you. If you’re just outside Arrington, we cover Croydon (1 mile south-west), Wimpole (1 mile east), Wendy (2 miles south), Orwell (2 miles east) and Shingay (3 miles south-west). Larger places within reach include Cambridge (10 miles north-east), St Neots (11 miles north-west), Huntingdon (15 miles north), St Ives (14 miles north), Royston (6 miles south) and Cambourne (6 miles north).
What’s near Arrington
Typical jobs here are in homes near Church of St Nicholas and Hardwicke Arms Hotel and the streets around them. The closest station to Arrington is Shepreth station, roughly 4.2 miles east. A little further out are Orwell Toot Hill (2.3 miles east) and Tower Museum Bassingbourn (2.9 miles south). For a walk, there’s Buff Wood.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Don’t leave a fresh chip for long
- Get a dripping tap fixed promptly
- If an acrylic bath flexes, have its feet adjusted
- Store metal items away from the bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
When to call us in Arrington
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Chips caused by builders
- A kit repair that didn’t last
- Impact holes in acrylic
- Rusty patches near the plughole
What to look for in a quote
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- How long it needs to cure
- A fixed price, and whether VAT is included
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in Arrington
- Every repair guaranteed for a year
- Same prices wherever you are
- Colour mixed on the day to match
- Repair technicians who travel to you, UK-wide
Take a look at our prices page or bath cost comparison.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes a few hours, depending on the damage.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
More services for Arrington
Your questions about bath repair in Arrington
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
About our accreditations · Every repair comes with a one-year guarantee.
