Cambridgeshire · England

Bath chip & crack repair in Wimpole, Cambridgeshire

Bath repair across Wimpole and nearby, done in a single visit in most cases.

  • Repairs from £95
  • A cracked acrylic bath
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Wimpole

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Bath repair in Wimpole, done in place

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you’re dealing with rust by the waste and overflow and scratches you can feel with a fingernail, we can normally put it right, on cast iron enamel, roll-top & freestanding and whirlpool & spa baths alike.

Your repair is guaranteed for a year, as with every job we do.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Wimpole (SG8)
Area hub
Cambridgeshire
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

To keep it looking its best:

  • Ensure an acrylic bath is firm underfoot
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Don’t scrub with anything abrasive
  • Do not leave a fresh chip for long

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.

When to call us in Wimpole

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.

Look out for these signs:

  • Chips caused by builders
  • Deep scratches in acrylic
  • Rust spots around the plughole
  • Chips under the taps

Before you book anyone

  • Who turns up on the day
  • Whether the price covers travel
  • How long it needs to cure
  • The length of the guarantee and what it covers

How to compare quotes

Our work in Wimpole

Wimpole is about 6 miles north of Royston, in Cambridgeshire. From the centre of Wimpole to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 371 places in Cambridgeshire, from the larger towns to small villages. Our nearest city page is London, about 44 miles away.

Here we cover the SG8 postcode area. Other places close to Wimpole include Orwell (1 mile east), Arrington (1 mile west), Wendy (2 miles south-west), Croydon (2 miles west) and Great Eversden (2 miles north-east). Within a short drive, we also cover Cambridge (9 miles north-east), St Neots (12 miles north-west), St Ives (14 miles north), Royston (6 miles south), Cambourne (6 miles north) and Godmanchester (14 miles north-west).

What’s near Wimpole

Locally, our jobs take us to homes close to Church of St Andrew, The Chequers Public House and Petersfield CofE Aided Primary School, among other places. Wimpole’s nearest station is Shepreth station, roughly 3 miles east of the centre. A little further out are Tower Museum Bassingbourn (2.6 miles south) and Orwell Toot Hill (1.2 miles north-east). Open spaces near Wimpole include Rowley's Hill and L-moor.

Map of Wimpole © OpenStreetMap contributors

Questions from Wimpole

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can I get a quote without a visit?

Usually, yes. Clear pictures let us give you a fixed quote without visiting.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is a holed acrylic bath repairable?

Typically. Photos of the hole and the underside help us check.

Can rust on a bath be repaired?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

What bath repair costs

Prices start from £95. You won’t pay by the hour. The price depends on:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Getting a price from photos

Most quotes are done from pictures alone. To make it quick:

  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath

The quickest way to a price is to send two or three photos through our quote form or ring us. We will say straight away whether it can be repaired.

How it works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the next day.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Let us know about parking or access
  • Ensure the area is dry

Get a quote

If you are in Wimpole and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Advice

Landlord and trade work in Wimpole

Landlords, letting agents and housing providers in Wimpole use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.