Oxfordshire · England
Bath chip & crack repair in Ascott Earl, Oxfordshire
We travel to Ascott Earl for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
How we handle bath repair in Ascott Earl
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and people most often call us about chips caused by builders and deep scratches in acrylic.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Ascott Earl (OX7)
- County
- Oxfordshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Ascott Earl
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you work in Ascott Earl?
We do. Technicians travel to Ascott Earl from across the region, and the price is the same as everywhere else.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How do I get a price for bath repair in Ascott Earl?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your OX7 postcode.
Something went through my bath. Can it be fixed?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Places near Ascott Earl
What else we do in Ascott Earl
Where we work around Ascott Earl
Ascott Earl is about 6 miles north-west of Witney, in Oxfordshire. Whether you’re in the middle of Ascott Earl or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Ascott Earl is one of 443 places in Oxfordshire we cover. We work right across the region, from Ascott Earl to Birmingham (about 44 miles away).
Postcode districts we cover here: OX7. Whether you live on London Lane, Shipton Road and Heritage Lane or anywhere nearby, a technician can come to you. We also cover the places around Ascott Earl: Ascott-under-Wychwood (1 mile east), Ascott d'Oyley (1 mile south-east), Shipton-under-Wychwood (1 mile west), Chilson (1 mile north-east) and Lyneham (2 miles north-west). We also work in nearby towns such as Witney (6 miles south-east), Carterton (7 miles south), Faringdon (15 miles south), Kidlington (12 miles east), Chipping Norton (5 miles north) and St John Street area (15 miles south-east).
Local landmarks in Ascott Earl
Typical jobs here are in homes near Church of the Holy Trinity, among other places. There is a railway station in Ascott Earl itself: Ascott-Under-Wychwood station. The countryside around Ascott Earl includes Blenheim Farm.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to two to three hours for most chips, tidy-up included.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Open a window if you can
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
When to call us in Ascott Earl
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Keep an eye out for any of the following:
- An old repair that has yellowed or come loose
- Chips caused by builders
- Holes from dropped items
- Chips on the rim or sides
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- What prep work is covered
- How soon you can use it again
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
Take a look at our pricing and guide to resurfacing and replacement costs.
What a repair cannot fix
A repair isn’t right for every job, for example:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The material
- Unusual colours or finishes
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A picture taken from further back
- Something in shot to show the size
- Any earlier repairs or coatings
- Any details about the material
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
