Oxfordshire · England
Bath Repair for Faringdon homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Faringdon, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Rust by the waste and overflow
Bath repair in Faringdon without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s an old repair that has yellowed or come loose and rust spots around the plughole, we can help, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Faringdon (SN7)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We won’t take on work that will not last, so these are the limits:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Nearby places to Faringdon
What else we do in Faringdon
How it works
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow two to three hours for most chips. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
Our work in Faringdon
Faringdon is about 10 miles south-west of Witney, in Oxfordshire. Our technicians come to customers in Faringdon and the surrounding area, so there’s no workshop to go to. We work in 443 places across Oxfordshire, from the larger towns to small villages. We work right across the region, from Faringdon to Birmingham (58 miles away).
We cover every part of SN7. Whether you live on Station Road, Marlborough Gardens and Marlborough Close or a nearby road, a technician can come to you. Faringdon sits on or near the A417 and A4095, so getting to you is simple. Nearby, we also work in Little Coxwell (1 mile south), Fernham (2 miles south), Shellingford (2 miles south-east), Hatford (3 miles east) and Baulking (3 miles south-east). Further out, we also cover Didcot (15 miles east), Abingdon-on-Thames (13 miles east), Witney (10 miles north-east), Carterton (8 miles north), Wantage (8 miles south-east) and Grove (8 miles south-east).
Near you in Faringdon
Locally, our jobs take us to homes close to Church of All Saints, Faringdon Infant School and The Swan pub and the streets around them. Other landmarks nearby include Faringdon Day Hospital (within half a mile north) and Faringdon Castle (0.8 miles north-east). Open spaces near Faringdon include Badbury Hill.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
What we’re called out for in Faringdon
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- A hole punched through by something heavy
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Before you book anyone
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
- When it can be used again
- The length of the guarantee and what it covers
Aftercare tips
Simple care helps the repair last. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath does not move when you stand in it
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Questions from Faringdon
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Which areas do you work in?
Everywhere in the UK, Faringdon included. Travel is included in the price.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repair or replace in Faringdon?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
What you get with us
- We leave the room as we found it
- One visit for most repairs
- Nothing taken out or refitted
- Same prices wherever you are
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
