North Yorkshire · England
Bath Repair in Asenby
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Asenby, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that is discoloured or lifting
About our bath repair in Asenby
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you are dealing with chips caused by builders and scratches you can feel with a fingernail, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Asenby and across North Yorkshire.
- Where
- Asenby (YO7)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Asenby
Asenby is about 6 miles north-east of Ripon, in North Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 626 places across North Yorkshire, from the larger towns to small villages. We work right across the region, from Asenby to Leeds (26 miles away).
All of YO7 is within our area. Jobs here include addresses on Jamesville Way, Meadow Lane and Orchard Cottages and the roads around them. Neighbouring places we cover include Topcliffe (1 mile north), Eldmire (1 mile east), Dalton (2 miles east), Fawdington (3 miles south-east) and Sessay (3 miles east). We also work in nearby towns such as Harrogate (14 miles south-west), Knaresborough (12 miles south), Ripon (6 miles south-west), Northallerton (12 miles north), Starbeck (13 miles south) and Thirsk (5 miles north-east).
Near you in Asenby
We visit homes around Topcliffe CofE Academy, Church of St Columba and The Angel pub. Asenby’s nearest station is Thirsk station, about 4 miles north. Further afield, we also cover the area around Hutton Conyers Castle (4.7 miles west).
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What bath repair costs
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- Where the damage is and how we get to it
- The size and number of damaged areas
- The material and finish
- Any earlier repairs that need removing first
Our prices are the same across the UK, with no extra for Asenby. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Details of any past repairs
- Something in shot to show the size
- Any details about the material
Upload a picture of the damage and one of the whole item, and tell us you are in Asenby, and we’ll come back with a fixed quote.
Nearby places to Asenby
Other services in Asenby
Common questions in Asenby
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Clear the area around the damage
- Ensure the room can be ventilated
- Let us know which floor the room is on
Ask for a price
Most clients in Asenby get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- No extra charge for your area
- Nothing taken out or refitted
- Colour mixed on the day to match
- Free fixed quotes from pictures
See our prices page or guide to resurfacing and replacement costs.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
