Nottinghamshire · England
Bath Repair for Attenborough homes
Damaged bath in Attenborough? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- Snagging damage from a refit
What bath repair costs
Prices start from £95. There’s no charge for travel to Attenborough. The price depends on:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- What kind of damage it is
- How many areas need work
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Any details about the material
- A close-up of the damage, in focus
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Bath repair in Attenborough, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are snagging damage from a refit and scratches you can feel with a fingernail.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Attenborough (NG9)
- Region
- Nottinghamshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow a morning or an afternoon.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Attenborough questions
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I get a price for bath repair in Attenborough?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Are there extra charges for Attenborough?
No. Our quotes include travel, and we charge the same wherever you are.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first.
Landlord and trade work in Attenborough
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What a repair cannot fix
We will always be straight with you, so here’s what a repair won’t do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Our work in Attenborough
Attenborough is about 1 mile south of Beeston, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 329 places across Nottinghamshire. Our jobs stretch from Attenborough to Birmingham (41 miles away).
Our visits in NG9 work the same way as everywhere else we cover. We regularly work on streets such as Long Lane, Shady Lane and Elm Avenue and the roads around them. Neighbouring places we cover include Chilwell (1 mile north), Toton (1 mile west), Beeston (1 mile north), Bramcote (2 miles north) and Lenton Abbey (2 miles north). We also work in nearby towns such as Carlton (7 miles north-east), Sutton in Ashfield (15 miles north), Hucknall (9 miles north), West Bridgford (4 miles east), Netherfield (8 miles north-east) and Eastwood (8 miles north).
Around Attenborough
Around Attenborough, we work in homes near The Corn Mill pub, Chilwell School and Chetwynd Primary Academy and the streets around them. Attenborough has its own railway station: Attenborough station. A little further out are Museum of the Mercian Regiment (0.8 miles north-west) and Queen's Medical Centre (3.2 miles north-east). Not far away are Attenborough Nature Reserve and Wilford Hill.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How to look after the repair
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Have new chips seen to early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Also near Attenborough
Also in Attenborough
Common problems we fix in Attenborough
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Most people contact us after spotting one of these:
- Damage beneath the taps
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- A chipped rim or side
Questions to ask before you book
- How your room will be protected
- What preparation is included
- How the colour is matched
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
