Warwickshire · England
Bath chip & crack repair in Attleborough, Warwickshire
Problem with your bath in Attleborough? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Cracks in an acrylic bath
Bath repair in Attleborough without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the day after. We work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are rusty patches near the plughole and damage beneath the taps.
All our work is covered by our one-year guarantee, wherever you are in Warwickshire.
- Area
- Attleborough (CV11, CV10, CV13)
- Area hub
- Warwickshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
Also near Attleborough
Also in Attleborough
When we’d advise against a repair
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Attleborough and nearby
Attleborough is about 1 mile south-east of Nuneaton, in Warwickshire. Customers in Attleborough get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover 324 places in Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 19 miles away.
Jobs in CV11, CV10 and CV13 are booked in the same way as anywhere else. From Rose Lane, Glebe Road and Coton Road or a nearby road, we can come to you. Close by, we cover Chilvers Coton (1 mile west), Nuneaton (1 mile north-west), Horeston Grange (1 mile north-east), Whitestone (1 mile south-east) and Bermuda (1 mile south-west). Larger places within reach include Rugby (13 miles south-east), Bedworth (3 miles south), Kenilworth (13 miles south), Fordbridge (12 miles west), Atherstone (6 miles north-west) and Castle Vale (14 miles west).
Local landmarks in Attleborough
Typical jobs here are in homes near Wembrook Primary School, The Bull and Spice pub and The George Eliot School and the streets around them. Nearby too are Church of the Holy Trinity (under half a mile south-east) and King Edward VI College (0.5 miles north-west). For rail, the closest station is Nuneaton station, about 0.8 miles north. Other landmarks nearby include George Eliot Hospital Museum (0.8 miles west) and George Eliot Hospital (0.8 miles south-west).
Work for landlords and builders
For anyone letting property in or around Attleborough, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Common questions in Attleborough
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you work in Attleborough?
We do. We send a technician to Attleborough for every job, with no extra charge for travel.
Aftercare tips
Looking after the surface is easy:
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
- Ensure an acrylic bath is firm underfoot
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
What we are called out for in Attleborough
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Customers usually contact us about:
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- Cracks in an acrylic bath
- Rust spots around the plughole
What to look for in a quote
- What the guarantee covers, and for how long
- What preparation is included
- When it can be used again
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
