Warwickshire · England
Bath & shower resealing (mastic) in Attleborough, Warwickshire
Bath, shower and sink resealing with new mould-resistant silicone at your home in Attleborough, with a one-year guarantee on every repair.
- Old sealant that looks dirty
- An untidy old seal
- Gaps by the taps
Questions from Attleborough
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Attleborough.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you seal over the old sealant?
All the old sealant comes out. New silicone will not bond to old.
What does bath resealing cost?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
Will the price change on the day?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Bath resealing in Attleborough without replacing anything
We reseal baths with them filled with water, so the joint is at its widest, so the seal does not tear when the bath is first used. We work on basins & vanity units, baths and kitchen worktops & sinks, and common reasons people get in touch are sealant that’s split or lifting and stained silicone.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Attleborough (CV11, CV10, CV13)
- Area hub
- Warwickshire
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Attleborough
Attleborough is about 1 mile south-east of Nuneaton, in Warwickshire. Wherever you are in the CV11 postcode area, we carry out the work at your property. Attleborough is one of 324 places in Warwickshire where we work. Our nearest city page is Birmingham, about 19 miles away.
Here we cover the CV11, CV10 and CV13 postcode area. We regularly work on streets such as Rose Lane, Glebe Road and Coton Road and the roads around them. Close by, we cover Chilvers Coton (1 mile west), Nuneaton (1 mile north-west), Horeston Grange (1 mile north-east), Whitestone (1 mile south-east) and Bermuda (1 mile south-west). Within a short drive, we also cover Rugby (13 miles south-east), Bedworth (3 miles south), Kenilworth (13 miles south), Fordbridge (12 miles west), Atherstone (6 miles north-west) and Castle Vale (14 miles west).
What’s near Attleborough
In Attleborough, that means homes near Wembrook Primary School, The Bull and Spice pub and The George Eliot School and the streets around them. Also close by are Church of the Holy Trinity (less than half a mile south-east) and King Edward VI College (0.5 miles north-west). Attleborough’s nearest station is Nuneaton station, about 0.8 miles north. Well-known places in the area include George Eliot Hospital Museum (0.8 miles west) and George Eliot Hospital (0.8 miles south-west).
What affects the price in Attleborough
You will not pay by the hour. The price depends on:
- The size and number of damaged areas
- What the surface is made of
- What kind of damage it is
- How easy the damage is to reach
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- One sharp close-up of the damage
- Something in shot to show the size
- Natural light rather than flash
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep bottles off the joints
- Dry the seal after bathing
- Clean the joints with a mild cleaner
- Air the room after use
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Attleborough as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Why it’s worth resealing in Attleborough
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Attleborough customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Work done at your home or business
- Free fixed quotes from pictures
See our pricing.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes around two hours, and you can get on with other things while we’re there.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Gaps too big for silicone alone
- Hidden water damage
- A flexing bath
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
Places near Attleborough
More services for Attleborough
About our accreditations · Every repair comes with a one-year guarantee.
