Highland · Scotland
Bath chip & crack repair in Auldearn, Highland
Bath repair in Auldearn without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Damage beneath the taps
- A chipped rim or side
Bath repair in Auldearn, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Whether it’s a kit repair that didn’t last and impact holes in acrylic, we can generally put it right, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Auldearn (IV12)
- Area hub
- Highland
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Auldearn
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- How hard the colour is to match
- The material
- Previous DIY repairs that have to come out
We charge the same wherever you are, so there’s no premium for Auldearn. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- Any details about the material
- Natural light rather than flash
- One sharp close-up of the damage
Most customers in Auldearn get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
What we can’t put right
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Keeping it looking good
Nothing complicated is needed:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Also in Auldearn
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes two to three hours for most chips for most jobs. We leave the room clean and you will know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Ensure the room can be ventilated
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Get a quote
Email us a photo of the damage and a wider shot of the entire item, and tell us you’re in Auldearn, and we will come back with a fixed quote.
Advice
FAQs for Auldearn
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
How do I get a price for bath repair in Auldearn?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Auldearn.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
When to call us in Auldearn
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
The most common problems we’re called about are:
- A failed DIY repair that’s discoloured or lifting
- Damage beneath the taps
- Chips along the edge of the bath
- Impact holes in acrylic
Questions to ask before booking
- Whether a trained technician does the job
- What happens if they find more damage
- What prep work is covered
- Whether the price is fixed and includes VAT
Where we work around Auldearn
Auldearn is about 2 miles east of Nairn, in Highland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 253 places across Highland, from the larger towns to small villages.
We cover every part of IV12 and the streets around it. Streets in the area include High Street, Church Road and Innes Terrace, all of which we cover. Other places close to Auldearn include Kingsteps (2 miles north-west), Nairn (2 miles west), Cawdor (4 miles south-west), Dyke (5 miles north-east) and Mundole (6 miles east). Within a short drive, we also cover Cradlehall (14 miles south-west), Fortrose (12 miles west), Culloden (14 miles south-west), Cromarty (11 miles north-west), Avoch (14 miles west) and Westhill (15 miles south-west). If you’re somewhere remote, call first so we can plan the visit.
Local landmarks in Auldearn
Locally, our jobs take us to homes close to Auldearn Church, among other places. For rail, the closest station is Nairn station, roughly 2.4 miles west. Nearby you will also find Nairn Fishertown Museum (2.3 miles west) and Nairn Town and County Hospital (2.4 miles west). Not far away are Loch Loy and Hill of Urchany.
About our accreditations · Every repair comes with a one-year guarantee.
