Rochdale · England

Bath chip & crack repair in Balderstone, Rochdale

Chip and crack repairs to enamel, acrylic and cast iron baths in Balderstone, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Balderstone

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Bath repair in Balderstone, done in place

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include rust spots around the plughole and damage done while the bathroom was being fitted, in acrylic, whirlpool & spa baths and pressed steel enamel.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Balderstone (OL11, OL16)
County
Rochdale
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

How to care for the repair

To keep it looking its best for years:

  • If an acrylic bath flexes, have its feet adjusted
  • Avoid scourers, wire wool and gritty cream cleaners
  • Get a dripping tap fixed promptly
  • Don’t leave razors or cans standing in the bath

A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We clean up when we are done and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can
  • Ensure the area is dry

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

What we can’t put right

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • A steel bath rusted through
  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

FAQs for Balderstone

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

How much does bath repair cost in Balderstone?

Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

What happens after I send photos?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

When to call us in Balderstone

Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

It’s worth getting a quote if you see:

  • Hairline or through cracks in acrylic
  • Rust by the waste and overflow
  • Snagging damage from a refit
  • Impact holes in acrylic

What to look for in a quote

  • If travel is included in the price
  • What happens if the damage is worse than the photos show
  • Is the price fixed, and does it include VAT?
  • How to care for the finish

Choosing a repair company

Repair or replace: which is better?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why Balderstone clients choose us

  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited
  • We leave the room as we found it

Take a look at our pricing and guide to resurfacing and replacement costs.

Prices and what affects them

Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

A repair is priced on what needs doing, not where you live. The full price is agreed before booking.

Quotes from your pictures

Phone pictures are fine. Just make sure we can see:

  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • A clear, close picture of the problem area
  • Any details about the material

Upload a picture of the damage and one of the entire item, with your OL11 postcode, and we will come back with a fixed quote.

Balderstone and nearby

Balderstone is about 1 mile south-east of Rochdale, in Rochdale. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Balderstone is one of 46 places in Rochdale where we work. Our nearest city page is Manchester, about 9 miles away.

Postcode districts we cover here: OL11 and OL16. That includes homes on Digby Road, Dacre Road and Perth Road and the roads around them. Balderstone sits on or near the A664, which makes travel easy. Nearby, we also work in Burnedge (1 mile south-east), Summit (1 mile south), Thornham (1 mile south), Castleton (1 mile south-west) and Thornham Fold (2 miles south). Within a short drive, we also cover Middleton (4 miles south-west), Higher Blackley (6 miles south), Heywood (3 miles west), Littleborough (3 miles north-east), Langley (4 miles south-west) and Tonge (4 miles south-west). Balderstone is one of the larger places we cover in Rochdale.

Near you in Balderstone

Around Balderstone, we work in homes near Falinge Park, Spring Inn and Balderstone Technology College and the streets around them. Other local landmarks include Kingsway Park High School (0.5 miles north-east), Church of Saint Mary (within half a mile north-west) and St Mary's Church of England Primary School (under half a mile north-west). For rail, the closest station is Rochdale station, about 0.8 miles north-west of the centre. Further afield, we also cover the area around Fireground (0.9 miles north-west) and Birch Hill Hospital (2.9 miles north). The countryside around Balderstone includes Tandle Hill.

  • Local facilities include Butterworth (2 miles east)
Map of Balderstone © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.