Cambridgeshire · England
Bath chip & crack repair in Balsham, Cambridgeshire
Fixed-price bath repair in Balsham and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- Snagging damage from a refit
Bath repair at your home in Balsham
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on acrylic, roll-top & freestanding and cast iron enamel, and the jobs we see most are rust spots around the plughole and hairline or through cracks in acrylic.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Balsham (CB21)
- Area hub
- Cambridgeshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Balsham
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Places near Balsham
Other services in Balsham
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- What kind of damage it is
- The size and number of damaged areas
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
You can take the photos on your phone. Ensure they show:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Common questions in Balsham
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Which areas do you work in?
We work UK-wide, so Balsham is covered. Prices do not change with location.
Do you cover Balsham?
We do. We send a technician to Balsham for every job, with no extra charge for travel.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Where we work around Balsham
Balsham is about 6 miles north-west of Haverhill, in Cambridgeshire. Anywhere in CB21, we carry out the work at your property. Our repair technicians cover 371 places across Cambridgeshire. You can also see our page for London, about 47 miles away.
Our visits in CB21 are booked in the same way as anywhere else. You will find streets such as High Street, Trinity Close and Sleford Close. Nearby, we also work in West Wratting (1 mile north-east), West Wickham (2 miles south-east), Lark Hall Corner (2 miles north), Streetly End (2 miles south-east) and Weston Colville (2 miles north-east). Within a short drive, we also cover Cambridge (9 miles north-west), Newmarket (9 miles north-east), Royston (15 miles west), King's Hedges (10 miles north-west), Soham (14 miles north) and Arbury (11 miles north-west).
Around Balsham
Around Balsham, we work in homes near Church of Holy Trinity and Meadow Primary School and the streets around them. Not far away are Lower Wood and Rivey Hill.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why choose Surface Doctor in Balsham
- Every repair guaranteed for a year
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
Read our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Cambridgeshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Common problems we fix in Balsham
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
People normally call us after spotting one of these:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
Before booking anyone
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
- A fixed price, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
