Norfolk · England

Bath chip & crack repair in Barney, Norfolk

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Barney, with a one-year guarantee on every repair.

  • Repairs from £95
  • Rust by the waste and overflow
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Barney?

Can I fix it myself?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Bath repair in Barney without replacing anything

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s chips on the rim or sides and rust by the waste and overflow, we can typically put it right, whatever the material.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Location
Barney (NR21)
Area hub
Norfolk
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What we cannot put right

A few problems are outside what a surface repair can do:

  • Cracks in acrylic we cannot reach from underneath
  • Water coming from the waste or taps rather than the bath
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

Where we work around Barney

Barney is about 12 miles north of Dereham, in Norfolk. Wherever you are in the NR21 postcode area, a technician comes to you. Barney is one of 797 places in Norfolk where we work.

Every address in NR21 is within our area. Jobs here include addresses on The Street, The Drift and North View and the roads around them. If you’re just outside Barney, we cover Thursford (1 mile north), Fulmodeston (1 mile south), Croxton (1 mile south-west), Thursford Green (1 mile north-west) and Swanton Novers (2 miles east). Larger places within reach include Dereham (12 miles south), Sheringham (12 miles north-east), Cromer (15 miles east), Fakenham (5 miles west), Aylsham (13 miles east) and Holt (7 miles north-east).

Around Barney

In Barney, that means homes near Church of St Mary and the streets around them. Well-known places in the area include Thursford Collection (1.5 miles north-west). The countryside around Barney includes Thursford Wood.

Map of Barney © OpenStreetMap contributors

Should you replace it?

Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

Why us?

  • Rooms protected and left tidy
  • Colours mixed by hand to suit your surface
  • Fixed prices from your pictures
  • Every repair guaranteed for a year

Take a look at our full price list and guide to resurfacing and replacement costs.

For landlords and businesses

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

For anyone letting property in or around Barney, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Store metal items away from the bath
  • Cover the bath during DIY or decorating
  • Get a dripping tap fixed promptly
  • Get any new chip repaired before it rusts

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

Signs you need bath repair in Barney

Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.

Keep an eye out for these signs:

  • A chipped rim or side
  • Damage done while the bathroom was being fitted
  • Rust by the waste and overflow
  • Damage beneath the taps

What to look for in a quote

  • What happens if they find more damage
  • What aftercare is recommended
  • A fixed quote, and whether VAT is included
  • How long the guarantee is and what it covers

10 questions to ask before you book

How it works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can generally use the bath the following day.

Before we arrive

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Send photos for a quote

Related advice

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Questions from Barney

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Can I get a quote without a visit?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

Do you work in Barney?

Yes. We work across the UK and travel to Barney. Send pictures and we will quote, or call 0345 017 0787.

What does bath repair cost?

Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Do the materials smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.