Norfolk · England
Bath chip & crack repair in Barnham Broom, Norfolk
Problem with your bath in Barnham Broom? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
Bath repair in Barnham Broom without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. We work on pressed steel enamel, acrylic and whirlpool & spa baths, and people most often call us about cracks in an acrylic bath and snagging damage from a refit.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Barnham Broom (NR9)
- Area hub
- Norfolk
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
How to care for the repair
Looking after the surface is easy:
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Landlord and trade work in Barnham Broom
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Barnham Broom questions
What areas do you cover?
Everywhere in the UK, Barnham Broom included. There is no extra charge for travel.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you cover Barnham Broom?
Yes, we do. Repair technicians travel to Barnham Broom from across the region, and the price is the same as everywhere else.
How do I get a price for bath repair in Barnham Broom?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Barnham Broom and the surrounding area
Barnham Broom is about 4 miles north-west of Wymondham, in Norfolk. Whether you are in the middle of Barnham Broom or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 797 places across Norfolk.
Here we cover the NR9 postcode area. You will find streets such as Bell Road, Hillside and Mill View, and we cover them all. If you’re just outside Barnham Broom, we cover Brandon Parva (1 mile north-west), Coston (1 mile west), Carleton Forehoe (1 mile south-east), Runhall (2 miles west) and Welborne (2 miles north-west). We also work in nearby towns such as Norwich (9 miles east), Dereham (7 miles north-west), Wymondham (4 miles south-east), Sprowston (11 miles east), Thorpe St Andrew (11 miles east) and Attleborough (8 miles south).
Near you in Barnham Broom
Our customers here include homes close to The Bell Inn and Church of St Peter and St Paul and the streets around them. Barnham Broom’s nearest station is Wymondham station, roughly 4.5 miles south-east of the centre.
Repair or replace in Barnham Broom?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Work done at your home or business
- No extra charge for your area
- Normally one visit, start to finish
- We’ll tell you if it’s not worth repairing
See our pricing or guide to resurfacing and replacement costs.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Honest limits
A repair isn’t right for every job, including:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Barnham Broom
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Common problems we fix in Barnham Broom
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
It’s worth getting a quote if you see:
- Chips under the taps
- Rust spots around the plughole
- Deep scratches in acrylic
- Chips caused by builders
Questions to ask before you book
- How to look after the finish
- How the colour is matched
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
Nearby places to Barnham Broom
What else we do in Barnham Broom
About our accreditations · Every repair comes with a one-year guarantee.
