Shropshire · England
Bath Repair for Batchcott homes
Bath repair in Batchcott without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Send us pictures and we will tell you honestly.
Materials we work on in Batchcott
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Bath repair in Batchcott, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. If you’re dealing with snagging damage from a refit and a cracked acrylic bath, we can normally put it right, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Batchcott (SY8)
- Area hub
- Shropshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
FAQs for Batchcott
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. You’re under no obligation.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Repair or replace in Batchcott?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why book with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
See our prices page and guide to resurfacing and replacement costs.
Signs you need bath repair in Batchcott
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
The most common problems we’re called about are:
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
- A chip where the taps sit
Questions to ask before booking
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- Who turns up on the day
- The length of the guarantee and what it covers
Also near Batchcott
Also in Batchcott
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Don’t scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Rinse it down after each bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Landlords, agents and businesses in Batchcott
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Related advice
Covering Batchcott
Batchcott is about 19 miles north of Hereford, in Shropshire. Customers in Batchcott get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our technicians cover 433 places across Shropshire. Our jobs stretch from Batchcott to Birmingham (about 37 miles away).
We work across SY8. Nearby, we also work in Mitnell (1 mile south), Richards Castle (1 mile south), Ashford Bowdler (1 mile east), Comberton (2 miles south) and Woofferton (2 miles south-east). Further out, we also cover Ludlow (3 miles north-east), Church Stretton (14 miles north), Craven Arms (8 miles north-west), Cleobury Mortimer (11 miles east), Bishop's Castle (15 miles north-west) and Clun (14 miles north-west).
Around Batchcott
In Batchcott, that means homes near Moor Park School, The Castle pub and Church of All Saints, among other places. The closest station to Batchcott is Ludlow station, about 2.8 miles north of the centre. Nearby you will also find Ludlow Community Hospital (2.9 miles north-east) and Ludlow Castle (2.4 miles north). Open spaces near Batchcott include High Vinnalls.
About our accreditations · Every repair comes with a one-year guarantee.
