Bath and North East Somerset · England
Bath chip & crack repair in Batheaston, Bath and North East Somerset
Our repair technicians come to Batheaston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
Bath repair in Batheaston, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We’re often asked to fix impact holes in acrylic and scuffs and scratches in the surface, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
All our work comes with our one-year guarantee, wherever you are in Bath and North East Somerset.
- Where
- Batheaston (BA1)
- Region
- Bath and North East Somerset
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
How to get a price
If you are in Batheaston and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
Batheaston and nearby
Batheaston is about 3 miles north-east of Bath, in Bath and North East Somerset. Clients in Batheaston get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Batheaston is one of 136 places in Bath and North East Somerset where we work. Our jobs stretch from Batheaston to Birmingham (about 76 miles away).
Every address in BA1 is within our area, from the main roads to the quietest streets. That includes homes on London Road East, High Street and Avon Court. We also cover the places around Batheaston: Bailbrook (1 mile south-west), Upper Swainswick (2 miles west), Charlcombe (2 miles west), Woolley (2 miles west) and Langridge (3 miles north-west). Within a short drive, we also cover Bath (3 miles south-west), Keynsham (8 miles west), Westmoreland (4 miles south-west), Kingsmead (3 miles south-west), Bear Flat (3 miles south-west) and Widcombe (3 miles south-west).
Local landmarks in Batheaston
We visit homes around The White Lion pub, Church of St John The Baptist and Alice Park. You will also find St Mark's CofE School (1.6 miles west) and Batheaston Church School (under half a mile north-west). Batheaston’s nearest station is Bath Spa station, about 2.7 miles south-west. Further afield, we also cover the area around Royal National Hospital for Rheumatic Diseases (3.4 miles west) and Bath Easton Museum (less than half a mile west).
Repair or replace: which is better?
Swapping a damaged bath for a new one normally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why book with us
- Same prices wherever you are
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- A fixed quote before booking
Take a look at our prices page and resurfacing vs replacement cost guide.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- How hard the colour is to match
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
You can take the photos on your phone. Just ensure we can see:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Details of any past repairs
- The material, if you know it
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Ensure an acrylic bath is firm underfoot
- Keep metal cans and razors off the surface
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Towns and villages near Batheaston
What else we do in Batheaston
Elsewhere in Bath and North East Somerset
Bath Repair in all 136 towns and villages in Bath and North East Somerset
Every service in Bath and North East Somerset
All UK areas
All about bath chip & crack repair
When a repair isn’t the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
FAQs for Batheaston
When can I have a bath again?
Generally the day after. We will tell you the exact curing time when we finish.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you come to Batheaston?
Yes, we do. Technicians travel to Batheaston from across the region, with no extra charge for travel.
What we’re called out for in Batheaston
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Keep an eye out for any of the following:
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- An old repair that has yellowed or come loose
- Impact holes in acrylic
What your quote should include
- What aftercare is recommended
- Whether they match the colour on site
- If travel is included in the price
- How your room will be protected
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
About our accreditations · Every repair comes with a one-year guarantee.
