Stoke-on-Trent · England
Bath Repair in Beasley
Chip and crack repairs to enamel, acrylic and cast iron baths in Beasley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- A chipped rim or side
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- No need to remove anything
- We leave the room as we found it
See our prices page or resurfacing vs replacement cost guide.
How we handle bath repair in Beasley
Most of our bath repairs take a few hours, and you can usually bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include a hole punched through by something heavy and scratches you can feel with a fingernail, in acrylic, whirlpool & spa baths and cast iron enamel.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Beasley (ST5)
- Area hub
- Stoke-on-Trent
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £95. You’ll know the full cost before you book. We take into account:
- What the surface is made of
- How much damage there is
- The colour and finish to match
- What kind of damage it is
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Any details about the material
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Email us pictures of the damage and one of the entire item, and tell us you’re in Beasley, and we will reply with a fixed price.
Places near Beasley
What else we do in Beasley
Do you need bath repair in Beasley?
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
The most common problems we’re called about are:
- A cracked acrylic bath
- Chips on the rim or sides
- Impact holes in acrylic
- Deep scratches in acrylic
Comparing quotes
- What protection goes down before work starts
- Whether the colour is mixed to match
- How long it needs to cure
- If travel is included in the price
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We clean up when we are done and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
When we would advise against a repair
Some jobs aren’t right for a repair, including:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Have new chips seen to early
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Beasley questions
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for bath repair in Beasley?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Are there extra charges for Beasley?
No. Our quotes include travel, with the same prices everywhere we work.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Covering Beasley
Beasley is about 1 mile north of Newcastle-under-Lyme, in Stoke-on-Trent. Jobs in Beasley are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 59 towns and villages across Stoke-on-Trent. Our nearest city page is Manchester, about 30 miles away.
Here we cover the ST5 postcode area. You will find streets such as Talke Road, London Road and High Street, all of which we cover. If you are just outside Beasley, we cover Chesterton (1 mile north-west), Broad Meadow (1 mile south), Bradwell (1 mile east), Crackley (1 mile north-west) and Porthill (1 mile east). Further out, we also cover Stoke-on-Trent (4 miles south-east), Hanley (3 miles east), Stoke-upon-Trent (3 miles south-east), Fenton (5 miles south-east), Smallthorne (3 miles east) and Penkhull (3 miles south-east).
Near you in Beasley
Our customers here include homes close to Chesterton Primary School, St Barnabas Church and Chesterton Community Sports College, among other places. For rail, the closest station is Longport station, about 1.1 miles east. Well-known places in the area include Bradwell Hospital (within half a mile east) and Chimney Pot Museum (1.2 miles east). For a walk, there’s Bignall Hill and Westport Lake.
- Local facilities include Audley and Bignall End (1.8 miles north-west)
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
