North Lincolnshire · England
Bath Repair in Beltoft
Bath repair for Beltoft, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Rust by the waste and overflow
- Impact holes in acrylic
Bath repair in Beltoft without replacing anything
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Common call-outs are for scuffs and scratches in the surface and damage beneath the taps, across acrylic, pressed steel enamel and cast iron enamel.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Beltoft (DN9)
- Area hub
- North Lincolnshire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Beltoft as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Questions from Beltoft
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens once I’ve sent photos?
We come back with a fixed price, plus dates. You’re under no obligation.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Do you come to Beltoft?
We do. We send a technician to Beltoft for every job, with no extra charge for travel.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. The main factors are:
- What the surface is made of
- How hard the colour is to match
- What kind of damage it is
- Where the damage is and how we get to it
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- A clear, close picture of the problem area
- A photo taken from further back
- Details of any past repairs
- Any details about the material
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Repairing versus replacing in Beltoft
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Every repair guaranteed for a year
- One price list for the entire UK
Read our full price list or resurfacing vs replacement cost guide.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
When to call us in Beltoft
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- Rust by the waste and overflow
- Snagging damage from a refit
- A chip where the taps sit
- Cracks in an acrylic bath
What your quote should include
- How long it needs to cure
- What aftercare is recommended
- Whether a trained technician does the job
- How the colour is matched
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Nearby places to Beltoft
What else we do in Beltoft
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Do not scrub with anything abrasive
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Beltoft and the surrounding area
Beltoft is about 5 miles west of Scunthorpe, in North Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 90 towns and villages across North Lincolnshire. We work right across the region, from Beltoft to Leeds (36 miles away).
Jobs in DN9 work the same way as everywhere else we cover. Nearby, we also work in West Butterwick (2 miles east), Derrythorpe (2 miles north-east), East Butterwick (2 miles east), Althorpe (2 miles north-east) and Burringham (3 miles north-east). Within a short drive, we also cover Scunthorpe (5 miles east), Bottesford (5 miles east), Brigg (12 miles east), Frodingham (6 miles north-east), Crosby (6 miles north-east) and Broughton (10 miles east).
Near you in Beltoft
For rail, the closest station is Crowle station, roughly 3 miles north-west. Further afield, we also cover the area around Haywain Farm Museum (2.5 miles south-west) and Scunthorpe General Hospital (5.3 miles north-east).
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
