Kent · England
Bath Repair for Beltring homes
Local bath repair for Beltring: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
How we handle bath repair in Beltring
Most of our bath repairs take a few hours, and you can normally bathe again the following day. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s snagging damage from a refit and chips under the taps, we can generally put it right, on roll-top & freestanding, acrylic and pressed steel enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Beltring (TN12)
- Region
- Kent
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Beltring
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Our work in Beltring
Beltring is about 5 miles east of Tonbridge, in Kent. Anywhere in TN12, we come to you. Beltring is one of 922 places in Kent where we work. We work right across the region, from Beltring to London (30 miles away).
Postcode districts we cover here: TN12. If you’re just outside Beltring, we cover Branbridges (1 mile north), Snoll Hatch (1 mile north-west), East Peckham (1 mile north-west), Hale Street (1 mile north) and Little Mill (1 mile west). Larger places within reach include Maidstone (7 miles north-east), Sevenoaks (11 miles north-west), Royal Tunbridge Wells (7 miles south-west), Tonbridge (5 miles west), Kings Hill (5 miles north) and Foley Park (8 miles north-east).
Near you in Beltring
In Beltring, that means homes near Mascalls School, East Peckham Primary School and St Mary. There’s a railway station in Beltring itself: Beltring station. Nearby you will also find The Hop Farm Museum (0.5 miles south) and Tunbridge Wells Hospital (5.5 miles south-west). Green spaces nearby include Tudeley Woods RSPB reserve.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Doing more than one item at once
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
Two or three clear photos are usually enough. Try to include:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
Upload pictures of the damage and a wider shot of the whole item, with your TN12 postcode, and we will reply with a fixed price.
Landlords, agents and businesses in Beltring
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Beltring customers choose us
- Dust sheets down, tidy finish
- Nothing taken out or refitted
- One visit for most repairs
- Colour-matched on site
See our pricing and guide to resurfacing and replacement costs.
What we’re called out for in Beltring
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The things customers normally mention when they call are:
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
- Holes from dropped items
- Cracks in an acrylic bath
Before you book anyone
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
- Who will actually do the work
- When it can be used again
Places near Beltring
More services for Beltring
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Store metal items away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
