Worcestershire · England

Bath chip & crack repair in Bevere, Worcestershire

Bath repair across Bevere and nearby, normally in one visit and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Bevere homes

Bevere and nearby

Bevere is about 2 miles north of Worcester, in Worcestershire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We cover all 376 towns and villages in Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 22 miles away.

Postcode districts we cover here: WR3. If you are just outside Bevere, we cover Claines (1 mile east), Northwick (1 mile south), Hallow (1 mile west), Little Eastbury (2 miles south-west) and Moseley (2 miles west). We also work in nearby towns such as Redditch (13 miles east), Kidderminster (11 miles north), Bromsgrove (10 miles north-east), Great Malvern (9 miles south-west), Droitwich Spa (4 miles north-east) and Stourport-on-Severn (8 miles north).

Around Bevere

Locally, our jobs take us to homes close to The Mug House, The Slip and River School. You’ll also find Church of St John the Baptist (within half a mile east), Claines CofE Primary School (0.5 miles east) and Tudor Grange Academy Worcester (1.4 miles south-east). For rail, the closest station is Worcester Foregate Street station, about 2.4 miles south of the centre. Well-known places in the area include Worcestershire Masonic Library and Museum (2.2 miles south) and Worcestershire Royal Hospital (3.3 miles south-east).

Map of Bevere © OpenStreetMap contributors

How we handle bath repair in Bevere

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We’re frequently asked to fix chips under the taps and rust by the waste and overflow, on acrylic, cast iron enamel and roll-top & freestanding.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Bevere (WR3)
Area hub
Worcestershire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

Should you replace it?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. We charge the same wherever you are, so there’s no premium for Bevere. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • One-year guarantee on every repair
  • Same prices wherever you are
  • Straight answers about what a repair can do
  • A fixed quote before booking

Read our full price list or bath cost comparison.

When to call us in Bevere

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

You may need us if you’ve spotted:

  • Chips caused by builders
  • A kit repair that didn’t last
  • Damage beneath the taps
  • Holes from dropped items

What to look for in a quote

  • How your room will be protected
  • How soon you can use it again
  • If travel is included in the price
  • What happens if they find more damage

How to compare quotes

Landlord and trade work in Bevere

We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

How to care for the repair

It’s all simple stuff, just a few sensible habits:

  • Put a towel in the bath if you’re working above it
  • Have new chips seen to early
  • If an acrylic bath flexes, have its feet adjusted
  • Stick to mild cleaners and a soft cloth

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Bevere: your questions answered

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Which areas do you work in?

We work UK-wide, so Bevere is covered. Our prices are the same everywhere.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Is a bath repair durable?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

What we do, step by step

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Getting a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Send photos for a quote

Related advice

What affects the price in Bevere

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • The material
  • What kind of damage it is
  • Any earlier repairs that need removing first
  • How hard the colour is to match

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Any details about the material
  • Natural light rather than flash
  • Something in shot to show the size
  • Your postcode, so we can check dates

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

When we would advise against a repair

Not everything can be repaired, and we would rather say so up front. We can’t fix:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.