Kent · England
Bath Repair for Bexon homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Bexon, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
Bath repair at your home in Bexon
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. Whether it’s hairline or through cracks in acrylic and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Bexon (ME9)
- County
- Kent
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Get a quote
Most customers in Bexon get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Bexon questions
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
When can I have a bath again?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
What areas do you cover?
The whole UK, including all of Kent. Just include your postcode and we will offer you dates.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Where we work around Bexon
Bexon is about 3 miles south of Sittingbourne, in Kent. Clients in Bexon get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 922 places in Kent. You can also see our page for London, about 37 miles away.
Our repair technicians cover all of the ME9 postcode area. Close by, we cover Tunstall (1 mile north), Dungate (2 miles east), Highsted (2 miles north-east), Heart's Delight (2 miles north) and Rodmersham Green (2 miles north-east). We also work in nearby towns such as Maidstone (8 miles west), Ashford (13 miles south-east), Sittingbourne (3 miles north), Whitstable (14 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
Local landmarks in Bexon
Around Bexon, we work in homes near Church of St John the Baptist, Fulston Manor School and Bredgar Church of England Primary School. Bexon’s nearest station is Sittingbourne station, about 2.9 miles north. Further afield, we also cover the area around Sittingbourne Heritage Museum (2.8 miles north-east) and Bayford Court (3.1 miles north-east).
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
After the repair has cured, a few habits help it last:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get a dripping tap fixed promptly
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Repair or replace in Bexon?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Dust sheets down, tidy finish
Take a look at our full price list and guide to resurfacing and replacement costs.
More services for Bexon
Landlords, agents and businesses in Bexon
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we are called out for in Bexon
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- A chip where the taps sit
- Deep scratches in acrylic
- Rust spots around the plughole
- Chips caused by builders
What your quote should include
- What protection goes down before work starts
- How long it needs to cure
- What aftercare is recommended
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
