Kent · England

Bath Re-enamelling in Bexon

Bath re-enamelling for Bexon, without a refit. Get a fixed price from your pictures, then book a visit.

  • Resurfacing from £350
  • Stains that will not shift
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Bexon?

Bath re-enamelling in Bexon without replacing anything

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s thin, worn enamel in places and staining under the taps and around the waste, we can help.

All our work is covered by a one-year guarantee, wherever you are in Kent.

Where
Bexon (ME9)
Region
Kent
Guarantee
12 months on all our work
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Our work in Bexon

Bexon is about 3 miles south of Sittingbourne, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Bexon is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 37 miles away.

Postcode districts we cover here: ME9. Close by, we cover Tunstall (1 mile north), Dungate (2 miles east), Highsted (2 miles north-east), Heart's Delight (2 miles north) and Rodmersham Green (2 miles north-east). Further out, we also cover Maidstone (8 miles west), Ashford (13 miles south-east), Sittingbourne (3 miles north), Whitstable (14 miles east), Faversham (8 miles east) and Minster (9 miles north-east).

Around Bexon

Our clients here include homes close to Church of St John the Baptist, Fulston Manor School and Bredgar Church of England Primary School. Bexon’s nearest station is Sittingbourne station, roughly 2.9 miles north of the centre. Nearby you’ll also find Sittingbourne Heritage Museum (2.8 miles north-east) and Bayford Court (3.1 miles north-east).

Map of Bexon © OpenStreetMap contributors

How it works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area
  • Keep children and pets away from the room on the day

Get a quote

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Send photos for a quote

Advice

What we cannot put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • A poorly supported acrylic bath, until it’s firmed up
  • A bath split right through the body
  • Leaks from fittings rather than the bath

Send us photos and we will tell you honestly.

Materials we repair

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price is based on:

  • How much damage there is
  • Access to the area
  • The material and finish
  • How hard the colour is to match

Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Something in shot to show the size
  • A close-up of the damage, in focus
  • A wider photo showing the entire bath
  • Whether it’s been repaired or coated before

To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

What we are called out for in Bexon

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Get in touch if you’ve noticed:

  • Brown or grey marks that do not clean off
  • A bath in a colour that no longer suits
  • Several chips and rust patches
  • An original cast iron bath that needs restoring

Before you book anyone

  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • What the guarantee covers, and for how long

10 questions to ask before booking

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Don’t leave a chip unrepaired
  • Rinse off hair dye, oils and bath bombs right away
  • Wipe the bath dry after use in hard water areas
  • Fix dripping taps quickly

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Different materials, different repairs

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Repair or replace: which is better?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Why choose Surface Doctor in Bexon

  • Work done at your home or business
  • Free fixed quotes from pictures
  • One visit for most repairs
  • A year’s guarantee on all work

Take a look at our pricing or resurfacing vs replacement cost guide.

Questions from Bexon

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Can you quote from pictures?

In nearly every case. If pictures do not show enough, we will ask for another angle.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you cover the entire of Kent?

All of Kent, and the rest of the UK. There is no extra charge for travel.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What happens after I send pictures?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.