Leeds · England
Bath chip & crack repair in Bickerton, Leeds
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bickerton and across Leeds. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
Covering Bickerton
Bickerton is about 3 miles east of Wetherby, in Leeds. We travel to homes and businesses in Bickerton and the surrounding area, so you do not need to take anything anywhere. Bickerton is one of 198 towns and villages in Leeds where we work. Our nearest city page is Leeds, about 14 miles away.
Our technicians cover all of LS22. You’ll find streets such as Main Street, Tom Cat Lane and Pinfold Close, and we cover them all. Neighbouring places we cover include Ingmanthorpe (2 miles west), Walton (2 miles south), Cowthorpe (2 miles north-west), Thorp Arch (2 miles south) and Cattal (2 miles north). Within a short drive, we also cover Leeds (14 miles south-west), Rothwell (15 miles south-west), Beeston (15 miles south-west), Horsforth (15 miles south-west), Wetherby (3 miles west) and Woodhouse (14 miles south-west).
Local landmarks in Bickerton
The nearest railway station is Cattal station, roughly 3.4 miles north of the centre. Well-known places in the area include Wetherby Castle (3.3 miles south-west).
Bath repair in Bickerton without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Whether it’s rusty patches near the plughole and a hole punched through by something heavy, we can generally put it right, whatever the material.
You get a one-year guarantee, the same in Bickerton as everywhere else we work.
- Area
- Bickerton (LS22)
- Area hub
- Leeds
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Also near Bickerton
Other services in Bickerton
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Your questions about bath repair in Bickerton
When can I have a bath again?
Typically the following day. We confirm the time before we leave.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Usually one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- No need to remove anything
Take a look at our pricing and bath cost comparison.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Prices and what affects them
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- The material and finish
- Access to the area
- How much damage there is
- The colour and finish to match
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
You can typically get a fixed price without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- One picture of the entire bath
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
The process
The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Let us know if it has been repaired before
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
