Leeds · England
Bath chip & crack repair in Hunsingore, Leeds
Bath repair across Hunsingore and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
How we handle bath repair in Hunsingore
You do not need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Typical jobs include chips under the taps and scuffs and scratches in the surface, on roll-top & freestanding, pressed steel enamel and acrylic.
You get a one-year guarantee, the same in Hunsingore as everywhere else we work.
- Location
- Hunsingore (LS22)
- Region
- Leeds
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Do you need bath repair in Hunsingore?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
You may need us if you’ve spotted:
- Chips under the taps
- Chips along the edge of the bath
- Rust spots around the plughole
- Impact holes in acrylic
Questions to ask before you book
- What preparation is included
- How to look after the finish
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
The process
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Landlords, agents and businesses in Hunsingore
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hunsingore: your questions answered
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can a cracked acrylic bath be fixed?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
When can I have a bath again?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
What bath repair costs
Repairs from £95. There is no area surcharge for Hunsingore. What changes the price is:
- How much damage there is
- The material
- The colour and finish to match
- How many items we do on one visit
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Any details about the material
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Most customers in Hunsingore get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Hunsingore and nearby
Hunsingore is about 3 miles north-east of Wetherby, in Leeds. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Our technicians cover 198 places in Leeds. We work right across the region, from Hunsingore to Leeds (about 14 miles away).
Postcode districts we cover here: LS22. Jobs here include addresses on Church Hill, Hawthorn Grove and Back Lane and the roads around them. We also cover the places around Hunsingore: Walshford (1 mile west), Cowthorpe (1 mile south), Cattal (1 mile east), Ingmanthorpe (2 miles south) and Bickerton (2 miles south-east). Larger places within reach include Leeds (14 miles south-west), Horsforth (15 miles south-west), Wetherby (3 miles south-west), Woodhouse (14 miles south-west), Otley (15 miles west) and Garforth (13 miles south).
Around Hunsingore
In Hunsingore, that means homes near Church of St John the Baptist and the streets around them. For rail, the closest station is Cattal station, about 1.9 miles north-east of the centre. A little further out are Wetherby Castle (3.7 miles south-west).
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a repair can’t fix
A repair is not right for every job, including:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.
Why book with us
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Fixed prices from your photos
Read our prices page or bath cost comparison.
Also near Hunsingore
Other services in Hunsingore
About our accreditations · Every repair comes with a one-year guarantee.
