Shropshire · England

Bath chip & crack repair in Billingsley, Shropshire

We travel to Billingsley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A cracked acrylic bath
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Billingsley

What we do, step by step

We agree an arrival time beforehand. Once we’re there, the work takes two to three hours for most chips in most cases. We leave the room clean and you will know when it can be used.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Let us know which floor the room is on
  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive

Getting a price

To get a price, send two or three photos through our quote form or ring us. We will say straight away whether it can be repaired.

Get a fixed price

Advice

Bath repair in Billingsley without replacing anything

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Whether it’s a chipped rim or side and a chip where the taps sit, we can normally put it right, on acrylic, whirlpool & spa baths and roll-top & freestanding alike.

A one-year guarantee comes as standard, so you’re covered after the visit.

Area
Billingsley (WV16)
Region
Shropshire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Questions from Billingsley

Are there extra charges for Billingsley?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What does bath repair cost?

Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your WV16 postcode.

Is a cracked acrylic bath repairable?

Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you come to Billingsley?

Yes. We work across the UK and come to Billingsley and the rest of Shropshire. Send photos and we will quote, or call 0345 017 0787.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.

Repairs by material

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Honest limits

Before you book, it’s worth knowing the limits:

  • A steel bath rusted through
  • Acrylic cracks with no access behind them
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us photos and we’ll tell you honestly before booking.

Surfaces we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel

Landlord and trade work in Billingsley

We work for landlords, letting agents and housing providers in Billingsley as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Should you replace it?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.

Why Billingsley customers choose us

  • Straight answers about what a repair can do
  • Most jobs done in one visit
  • We leave the room as we found it
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our full price list and bath cost comparison.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

When to call us in Billingsley

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

These are the problems we are asked about most:

  • Cracks in an acrylic bath
  • Damage done while the bathroom was being fitted
  • Holes from dropped items
  • Rust by the waste and overflow

What your quote should include

  • Who turns up on the day
  • How your room will be protected
  • What happens if the damage is worse than the pictures show
  • Aftercare advice

10 questions to ask before you book

How to care for the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Rinse it down after each bath
  • Get a dripping tap fixed promptly
  • Don’t leave a fresh chip for long
  • Keep abrasive pads and gritty cleaners away from the bath

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Billingsley and nearby

Billingsley is about 5 miles south of Bridgnorth, in Shropshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We cover all 433 towns and villages in Shropshire, from the larger towns to small villages. We work right across the region, from Billingsley to Birmingham (22 miles away).

Postcode districts we cover here: WV16. From Lincoln Fields and Bynd Lane or a nearby road, we can come to you. Billingsley sits on or near the B4363, which makes travel easy. We also cover the places around Billingsley: Lower Chorley (1 mile south-west), Highley (2 miles east), Sutton (2 miles north-east), Netherton (2 miles south-east) and Chelmarsh (2 miles north). Larger places within reach include Madeley (13 miles north), Bridgnorth (5 miles north), Ludlow (14 miles south-west), Shifnal (15 miles north), Broseley (11 miles north) and Albrighton (14 miles north-east).

Around Billingsley

Locally, our jobs take us to homes close to The Cape of Good Hope pub and Church of St Mary. Well-known places in the area include Bridgnorth Community Hospital (5.6 miles north) and Glazeley Castle (2.4 miles north).

Map of Billingsley © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.