Shropshire · England
Bath chip & crack repair in Stanley, Shropshire
Local bath repair for Stanley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- A kit repair that didn’t last
Our work in Stanley
Stanley is about 6 miles north-west of Kidderminster, in Shropshire. Whether you’re in the middle of Stanley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stanley is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 20 miles away.
Postcode districts we cover here: WV16. Other places close to Stanley include Netherton (1 mile west), Highley (1 mile north-west), Alveley (1 mile north-east), Nash End (2 miles south-east) and Coppicegate (2 miles south). Within a short drive, we also cover Madeley (14 miles north), Bridgnorth (7 miles north), Ludlow (15 miles west), Shifnal (15 miles north), Broseley (13 miles north) and Albrighton (14 miles north).
What’s near Stanley
In Stanley, that means homes near Church of St Mary, The Ship Inn and Severn Valley Country Park, among other places. Other landmarks nearby include Glazeley Castle (4.3 miles north-west).
Bath repair at your home in Stanley
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We’re frequently asked to fix chips under the taps and chips caused by builders, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Stanley (WV16)
- County
- Shropshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What bath repair costs
Prices start from £95. We charge the same across the UK, including Stanley. The price reflects:
- How hard the colour is to match
- What the surface is made of
- Where the damage is and how we get to it
- The size and number of damaged areas
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- One picture of the entire bath
- Something in shot to show the size
- Any details about the material
- Details of any past repairs
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repair or replace in Stanley?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
- Everything repaired in place
- Colours mixed by hand to suit your surface
See our prices page or resurfacing vs replacement cost guide.
Landlords, agents and businesses in Stanley
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Do you need bath repair in Stanley?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The things customers typically mention when they call are:
- A failed DIY repair that is discoloured or lifting
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- Damage beneath the taps
Before booking anyone
- How your room will be protected
- Whether the colour is mixed to match
- When it can be used again
- Is the price fixed, and does it include VAT?
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Honest limits
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Also near Stanley
Also in Stanley
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes a few hours, and you’re welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Read more
Common questions in Stanley
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.
