Midlothian · Scotland
Bath chip & crack repair in Bilston, Midlothian
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Bilston. Send photos for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Bath repair in Bilston without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and people most frequently call us about snagging damage from a refit and a chipped rim or side.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Bilston (EH25)
- County
- Midlothian
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Don’t leave a fresh chip for long
- Don’t leave razors or cans standing in the bath
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Your questions about bath repair in Bilston
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
What does bath repair cost?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Are there extra charges for Bilston?
Travel is included in the price, with the same prices everywhere we work.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Honest limits
A repair isn’t right for every job, including:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
How we price bath repair
Prices start from £95. We charge the same across the UK, including Bilston. What changes the price is:
- Unusual colours or finishes
- Doing more than one item at once
- Access to the area
- The material and finish
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- Something in shot to show the size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Landlords, agents and businesses in Bilston
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Where we work around Bilston
Bilston is about 3 miles north-east of Penicuik, in Midlothian. From the centre of Bilston to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Bilston is one of 33 towns and villages in Midlothian where we work.
All of EH25 is within our area. Jobs here include addresses on Seafield Crescent, Seafield Road and Stanley Avenue. We also cover the places around Bilston: Old Pentland (1 mile north), Roslin (1 mile south-east), Loanhead (1 mile north-east), Hillend (1 mile north-west) and Polton (2 miles east). Larger places within reach include Bonnyrigg (3 miles east), Dalkeith (5 miles east), Penicuik (3 miles south-west), Gorebridge (5 miles east), Newtongrange (5 miles east) and Mayfield (6 miles east).
Near you in Bilston
Our customers here include homes close to Roslin and the streets around them. For rail, the closest station is Eskbank station, roughly 3.9 miles east. Other landmarks nearby include Glencorse Museum (2.1 miles south-west) and Roslin Castle (1.5 miles south-east). Not far away are The New Leaf Co-op and Woodhouselee Hill.
Towns and villages near Bilston
What else we do in Bilston
Signs you need bath repair in Bilston
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Clients normally contact us about:
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- A cracked acrylic bath
- Scuffs and scratches in the surface
What to look for in a quote
- What protection goes down before work starts
- Who turns up on the day
- When it can be used again
- What prep work is covered
What we do, step by step
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
