Lancashire · England
Bath Repair in Blaguegate
Problem with your bath in Blaguegate? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Chips on the rim or sides
Do you need bath repair in Blaguegate?
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- A cracked acrylic bath
- Impact holes in acrylic
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
What your quote should include
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
- Aftercare advice
- If travel is included in the price
Bath repair in Blaguegate without replacing anything
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Common call-outs are for a chip where the taps sit and deep scratches in acrylic, on roll-top & freestanding, pressed steel enamel and acrylic.
Every repair is covered by our one-year guarantee.
- Where
- Blaguegate (WN8)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Towns and villages near Blaguegate
Also in Blaguegate
When we’d advise against a repair
It helps to know what we can’t do too:
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
- Don’t scrub with anything abrasive
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Read more
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Repairing versus replacing in Blaguegate
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Honest advice, even when it means no job
- One-year guarantee on every repair
- No extra charge for your area
- Technicians who travel to you, UK-wide
See our pricing and guide to resurfacing and replacement costs.
Common questions in Blaguegate
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do you cover the entire of Lancashire?
We work UK-wide. Prices don’t change with location.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Do you come to Blaguegate?
Yes. We cover the entire UK and travel to Blaguegate. Send pictures and we’ll quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Where we work around Blaguegate
Blaguegate is about 2 miles west of Skelmersdale, in Lancashire. Jobs in Blaguegate are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Our technicians cover 482 places in Lancashire, from the larger towns to small villages. Our jobs stretch from Blaguegate to Liverpool (about 11 miles away).
Our technicians cover all of WN8 and the streets around it. That includes homes on Firswood Road, Meadow Nook Drive and Hollin Hey Close and the roads around them. We also cover the places around Blaguegate: Brighouse Green (1 mile north-west), Four Lane Ends (1 mile south-west), Stanley Gate (1 mile south-west), Westhead (1 mile north-west) and Bickerstaffe (2 miles south-west). Larger places within reach include Chorley (10 miles north-east), Bamber Bridge (14 miles north-east), Leyland (11 miles north-east), Ormskirk (3 miles west), Penwortham (14 miles north) and Ashton-on-Ribble (15 miles north).
Landmarks near Blaguegate
In Blaguegate, that means homes near St Paul's Church, The Market Gate pub and St Richard's Catholic Primary School and the streets around them. The closest station to Blaguegate is Rainford station, about 2.8 miles south-east of the centre. Nearby you will also find Ormskirk and District General Hospital (2.4 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
