Swindon · England

Bath Repair for Blunsdon St Andrew homes

Problem with your bath in Blunsdon St Andrew? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Rust by the waste and overflow
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Blunsdon St Andrew

About our bath repair in Blunsdon St Andrew

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include impact holes in acrylic and a cracked acrylic bath, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.

A one-year guarantee comes as standard, so you are covered after the visit.

Where
Blunsdon St Andrew (SN25)
Region
Swindon
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Common questions in Blunsdon St Andrew

Can you price it without visiting?

Nearly always. If photos do not show enough, we’ll ask for another angle.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How do I get a price for bath repair in Blunsdon St Andrew?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first.

When can I have a bath again?

Most baths can be used the following day. We will tell you the exact curing time when we finish.

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

We work for landlords, letting agents and housing providers in Blunsdon St Andrew as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

What affects the price in Blunsdon St Andrew

Prices start from £95. We charge the same across the UK, including Blunsdon St Andrew. What changes the price is:

  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • What the surface is made of
  • How easy the damage is to reach

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

We price nearly every job from pictures. This is what we need:

  • One picture of the whole bath
  • Any details about the material
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus

Upload a photo of the damage and one of the whole item, with your SN25 postcode, and we’ll reply with a fixed quote.

Repair or replace in Blunsdon St Andrew?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

Why book with us

  • Free fixed quotes from pictures
  • Work done at your home or business
  • Straight answers about what a repair can do
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list and guide to resurfacing and replacement costs.

What we’re called out for in Blunsdon St Andrew

Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Common reasons people in Blunsdon St Andrew contact us are:

  • Impact holes in acrylic
  • Rust spots around the plughole
  • An old repair that has yellowed or come loose
  • Scratches you can feel with a fingernail

Questions to ask before you book

  • A fixed quote, and whether VAT is included
  • What protection goes down before work starts
  • Whether a trained technician does the job
  • Whether the price covers travel

How to compare quotes

Blunsdon St Andrew and nearby

Blunsdon St Andrew is about 2 miles north-west of Stratton St Margaret, in Swindon. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 68 towns and villages across Swindon, from the larger towns to small villages. Our jobs stretch from Blunsdon St Andrew to Birmingham (about 60 miles away).

All of SN25 is covered. That includes homes on Renoir Close, Reynolds Way and Kilby Crescent. Other places close to Blunsdon St Andrew include Broad Blunsdon (1 mile north-east), Hyde (1 mile east), Stanton Fitzwarren (2 miles east), Hannington (3 miles north-east) and Castle Eaton (4 miles north). Further out, we also cover Swindon (3 miles south), Royal Wootton Bassett (6 miles south-west), Freshbrook (4 miles south-west), Shaw (3 miles south-west), Wroughton (6 miles south) and Okus (4 miles south).

Landmarks near Blunsdon St Andrew

Around Blunsdon St Andrew, we work in homes near Bridlewood Primary School, Church of St Andrew and Abbey Park School, among other places. The closest station to Blunsdon St Andrew is Swindon station, roughly 2.8 miles south of the centre. Further afield, we also cover the area around Baird Museum of TV (2.5 miles south) and Princess Margaret Hospital (3.8 miles south).

  • Local facilities include Rodbourne Cheney (2.5 miles south)
Map of Blunsdon St Andrew © OpenStreetMap contributors

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

What we do, step by step

We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. It normally takes a few hours, and we’ll keep you posted as we go.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Read more

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

What we cannot put right

Some jobs aren’t right for a repair, including:

  • A bath that moves underfoot, until its support is fixed
  • A steel bath rusted through
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.