Swindon · England

Bath chip & crack repair in Freshbrook, Swindon

Bath repair across Freshbrook and nearby, usually in one visit.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Freshbrook

What happens on the day

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let us know which floor the room is on
  • Let the surface dry out before the visit

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Related advice

About our bath repair in Freshbrook

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with an old repair that has yellowed or come loose and chips along the edge of the bath, we can help, whatever the material.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Freshbrook (SN5, SN1, SN4)
County
Swindon
Warranty
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

What a repair cannot fix

A repair is not right for every job, including:

  • Wear across the entire surface, which needs re-enamelling
  • Cracks in acrylic we cannot reach from underneath
  • Leaking fittings, which need a plumber

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Questions from Freshbrook

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Is a repair better than a new one?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do you cover Freshbrook?

Yes. We work across the UK and come to Freshbrook and the rest of Swindon. Send us pictures for a fixed quote, or call 0345 017 0787.

Can you repair a crack in an acrylic bath?

Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Fix dripping taps early to stop staining and limescale
  • Keep abrasive pads and gritty cleaners away from the bath
  • Keep metal cans and razors off the surface
  • Rinse it down after each bath

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Should you replace it?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why Freshbrook customers choose us

  • No extra charge for your area
  • Nothing taken out or refitted
  • Free fixed quotes from pictures
  • Usually one visit, start to finish

Read our pricing and guide to resurfacing and replacement costs.

About Freshbrook

Freshbrook is about 2 miles south-west of Swindon, in Swindon. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover 68 places in Swindon, from the larger towns to small villages. Our jobs stretch from Freshbrook to Birmingham (64 miles away).

Every address in SN5, SN1 and SN4 is within our area. Whether you live on Hay Lane, Corfe Road and Marney Road or a nearby road, we can come to you. Main roads around Freshbrook include the A3102, which makes travel easy. Neighbouring places we cover include Toothill (1 mile east), Lydiard Tregoze (1 mile west), South Leaze (1 mile east), Shaw (1 mile north) and Wichelstowe (1 mile south-east). Further out, we also cover Stratton St Margaret (4 miles north-east), Royal Wootton Bassett (3 miles west), Haydon Wick (3 miles north-east), Priory Vale (3 miles north), Wroughton (3 miles south-east) and Upper Stratton (4 miles north-east). Being one of Swindon’s larger places, Freshbrook sees plenty of our work.

Landmarks near Freshbrook

Our customers here include homes close to Lydiard Park Academy, Toothill Church and The Village Tavern and the streets around them. The nearest railway station is Swindon station, roughly 2.4 miles north-east of the centre. A little further out are Princess Margaret Hospital (1.6 miles east) and Royal Wiltshire Yeomanry Museum (1.9 miles east).

  • Parks and local facilities nearby include Rodbourne Cheney (2.3 miles north-east)
Map of Freshbrook © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We price every job individually, from your photos. What matters most is:

  • Doing more than one item at once
  • The type of damage
  • What the surface is made of
  • How many areas need work

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • The material, if you know it
  • A wider photo showing the whole bath

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.

Do you need bath repair in Freshbrook?

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.

These are the problems we’re asked about most:

  • Deep scratches in acrylic
  • A kit repair that didn’t last
  • Chips caused by builders
  • Cracks in an acrylic bath

Before you book anyone

  • What prep work is covered
  • A fixed price, and whether VAT is included
  • Whether the price covers travel
  • Whether they match the colour on site

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.