Kirklees · England

Bath chip & crack repair in Boothroyd, Kirklees

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Boothroyd and across Kirklees. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Boothroyd

Bath repair in Boothroyd without replacing anything

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. We work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are a chipped rim or side and damage beneath the taps.

All our work comes with our one-year guarantee, wherever you are in Kirklees.

Location
Boothroyd (WF13, WF12, WF14)
County
Kirklees
Warranty
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Do not leave razors or cans standing in the bath
  • Make sure an acrylic bath is firm underfoot
  • Don’t scrub with anything abrasive
  • Don’t leave a fresh chip for long

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Your questions about bath repair in Boothroyd

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.

Do you repair coloured baths?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

How much does bath repair cost in Boothroyd?

Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Boothroyd and nearby

Boothroyd is about 1 mile west of Dewsbury, in Kirklees. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 189 towns and villages across Kirklees, from the larger towns to small villages. We work right across the region, from Boothroyd to Leeds (about 9 miles away).

Every address in WF13, WF12 and WF14 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Manor Road, Water Lane and Middle Road and the roads around them. If you’re just outside Boothroyd, we cover West Town (1 mile south-east), Dewsbury (1 mile east), Dewsbury Moor (1 mile north-west), Westborough (1 mile north-west) and Savile Town (1 mile south-east). Further out, we also cover Huddersfield (7 miles south-west), Cleckheaton (4 miles north-west), Meltham (11 miles south-west), Lockwood (7 miles south-west), Hillhouse (6 miles west) and Longwood (8 miles west).

Landmarks near Boothroyd

Our clients here include homes close to Church of St Matthew, Crow Nest Park and Westborough High School, among other places. Other local landmarks include Park Hotel (within half a mile south-east) and Boothroyd Primary Academy (less than half a mile south). Boothroyd’s nearest station is Dewsbury station, roughly 0.5 miles east. Further afield, we also cover the area around Dewsbury Museum & Gallery (under half a mile south-west) and Dewsbury and District Hospital (0.9 miles north). For a walk, there’s Jaw Hill.

Map of Boothroyd © OpenStreetMap contributors

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Preparing for the visit

  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing
  • Ensure the area is dry

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Get a fixed quote

Advice

Work for landlords and builders

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Should you replace it?

Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Free fixed quotes from pictures
  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list and resurfacing vs replacement cost guide.

When a repair is not the answer

A repair is not right for every job, for example:

  • Water coming from the waste or taps rather than the bath
  • Cracks in acrylic we cannot reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us photos and we will tell you honestly.

Materials we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

What we’re called out for in Boothroyd

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Customers typically contact us about:

  • Rust by the waste and overflow
  • Deep scratches in acrylic
  • Cracks in an acrylic bath
  • Impact holes in acrylic

Before booking anyone

  • Whether there are any call-out or travel charges
  • Whether a trained technician does the job
  • What prep work is covered
  • What the guarantee covers, and for how long

10 questions to ask before you book

Materials and what they mean for the repair

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.