Cornwall · England
Bath Repair for Bosorne homes
We travel to Bosorne for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Bath repair in Bosorne without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Whether it’s chips on the rim or sides and an old repair that has yellowed or come loose, we can usually put it right, on acrylic, whirlpool & spa baths and roll-top & freestanding alike.
Big or small, it’s backed by a one-year guarantee.
- Location
- Bosorne (TR19)
- County
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- We will tell you if it’s not worth repairing
See our full price list or guide to resurfacing and replacement costs.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Landlords, agents and businesses in Bosorne
For anyone letting property in or around Bosorne, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Bosorne use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Your questions about bath repair in Bosorne
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the entire of Cornwall?
Everywhere in the UK, Bosorne included. There is no extra charge for travel.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Bosorne and nearby
Bosorne is about 7 miles west of Penzance, in Cornwall. Anywhere in TR19, we come to you. We cover 644 places across Cornwall.
Here we cover the TR19 postcode area. Close by, we cover St Just (1 mile north-east), Boscean (1 mile north), Tregeseal (1 mile north-east), Botallack (1 mile north) and Carnyorth (2 miles north-east). We also work in nearby towns such as Penzance (7 miles east), Hayle (13 miles east), St Ives (11 miles north-east), Newlyn (6 miles east), Carbis Bay (11 miles north-east) and Foundry (13 miles east).
Near you in Bosorne
In Bosorne, that means homes near St Just Primary School, St Just in Penwith Parish Church and Cape Cornwall Secondary School, among other places. Nearby you’ll also find Watermill near Bosigran Castle (5 miles north-east). Open spaces near Bosorne include Carn Kenidjack.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What else we do in Bosorne
What we’re called out for in Bosorne
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Get in touch if you’ve noticed any of these:
- A kit repair that didn’t last
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
What your quote should include
- When it can be used again
- How changes to the job are handled
- Aftercare advice
- Is the price fixed, and does it include VAT?
The process
The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Let the surface dry out before the visit
- Clear the area around the damage
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
