Kent · England
Bath Repair in Bough Beech
We travel to Bough Beech for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rusty patches near the plughole
- Chips on the rim or sides
Bath repair in Bough Beech without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Whether it’s chips caused by builders and chips on the rim or sides, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Bough Beech (TN8)
- County
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take two to three hours for most chips.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Common questions in Bough Beech
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Do you work in Bough Beech?
Yes. We work across the UK and come to Bough Beech. Send photos and we’ll quote, or call 0345 017 0787.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Kent.
Towns and villages near Bough Beech
Other services in Bough Beech
What affects the price in Bough Beech
Repairs from £95. Every quote is fixed and free. What we look at:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How many areas need work
- The material and finish
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- One picture of the entire bath
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Do not leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Where we work around Bough Beech
Bough Beech is about 6 miles south-west of Sevenoaks, in Kent. Jobs in Bough Beech are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in 922 places across Kent. We work right across the region, from Bough Beech to London (23 miles away).
Jobs in TN8 work the same way as everywhere else we cover. We regularly work on streets such as Hever Road, Clinton Lane and Millbrook and the roads around them. Neighbouring places we cover include Charcott (2 miles east), Hall's Green (3 miles north-east), Ide Hill (3 miles north), Toy's Hill (3 miles north) and Goathurst Common (3 miles north). Larger places within reach include Sevenoaks (6 miles north-east), Royal Tunbridge Wells (8 miles south-east), Tonbridge (7 miles east), Swanley (14 miles north), Kings Hill (13 miles east) and Paddock Wood (12 miles east).
Local landmarks in Bough Beech
Around Bough Beech, we work in homes near The Wheatsheaf Public House and Chiddingstone Castle Park and Gardens and the streets around them. The closest station to Bough Beech is Hever station, about 1.9 miles south-west. A little further out are Tandridge Priory (5.6 miles north-west) and Hever Castle (1.1 miles south-west).
Do you need bath repair in Bough Beech?
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- A kit repair that didn’t last
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
Questions to ask before you book
- The length of the guarantee and what it covers
- How to look after the finish
- Whether cleaning and preparation are in the price
- How the room is protected while they work
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
