Greater London · England
Bath Repair for Toy's Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Toy's Hill. Free, fixed quotes from your pictures.
- Repairs from £95
- A chipped rim or side
- Cracks in an acrylic bath
For landlords and businesses
For anyone letting property in or around Toy's Hill, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
How we handle bath repair in Toy's Hill
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include impact holes in acrylic and chips along the edge of the bath, across roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Toy's Hill (TN16)
- Area hub
- Greater London
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Any earlier repairs that need removing first
- Doing more than one item at once
- How easy the damage is to reach
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
You can take the pictures on your phone. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Signs you need bath repair in Toy's Hill
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Look out for any of the following:
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
- Rusty patches near the plughole
What your quote should include
- What protection goes down before work starts
- If travel is included in the price
- The length of the guarantee and what it covers
- How to look after the finish
Toy's Hill and the surrounding area
Toy's Hill is about 4 miles south-west of Sevenoaks, in Greater London. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 764 towns and villages in Greater London, from the larger towns to small villages. Our nearest city page is London, about 20 miles away.
Every address in TN16 is within our area, from the main roads to the quietest streets. Local streets include Scords Lane and Puddledock Lane, and we cover them all. We also cover the places around Toy's Hill: Ide Hill (1 mile east), Brasted Chart (1 mile north), Goathurst Common (2 miles east), Brasted (2 miles north) and Sundridge (2 miles north). We also work in nearby towns such as Orpington (10 miles north), Thornton Heath (14 miles north-west), Croydon (12 miles north-west), Bromley (12 miles north), West Norwood (15 miles north-west) and Beckenham (13 miles north-west).
Near you in Toy's Hill
Our customers here include homes close to Stubbs Wood Country Park, Church of St Mary at South End of Village Green and Ide Hill Church of England Primary School, among other places. For rail, the closest station is Edenbridge station, about 3.2 miles south-west. A little further out are Hever Castle (3.9 miles south) and Tandridge Priory (3.5 miles west). Not far away are Dryhill Nature Reserve and Betsom's Hill.
Also near Toy's Hill
Other services in Toy's Hill
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the day after, the bath is ready to use.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
- Point us to the nearest place to park
How to get a price
For a price in Toy's Hill, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Usually one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Toy's Hill questions
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
What areas do you cover?
The entire UK, including all of Greater London. Just include your postcode and we’ll offer you dates.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
