Warwickshire · England
Bath Repair for Bourton on Dunsmore homes
Our repair technicians come to Bourton on Dunsmore for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
About our bath repair in Bourton on Dunsmore
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Whether it’s a cracked acrylic bath and damage beneath the taps, we can normally put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Bourton on Dunsmore (CV23)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
How to prepare
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Make sure the area is dry
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
Prices and what affects them
Prices start from £95. There is no area surcharge for Bourton on Dunsmore. What changes the price is:
- Doing more than one item at once
- How hard the colour is to match
- The material and finish
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed price
Two or three clear pictures are generally enough. It helps if you send:
- A picture taken from further back
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Bourton on Dunsmore and the surrounding area
Bourton on Dunsmore is about 5 miles south-west of Rugby, in Warwickshire. Clients in Bourton on Dunsmore get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Bourton on Dunsmore is one of 324 places in Warwickshire we cover. Our jobs stretch from Bourton on Dunsmore to Birmingham (24 miles away).
We cover every part of CV23 and the streets around it. You’ll find streets such as Main Street, Shuckburgh Crescent and Frankton Road, all of which we cover. Neighbouring places we cover include Frankton (1 mile south-west), Birdingbury (1 mile south), Dunsmore Heath (1 mile north), Leamington Hastings (2 miles south) and Lawford Heath (2 miles north-east). Within a short drive, we also cover Rugby (5 miles north-east), Nuneaton (14 miles north), Warwick (9 miles west), Royal Leamington Spa (7 miles west), Bedworth (11 miles north-west) and Leamington Spa (8 miles west).
Around Bourton on Dunsmore
In Bourton on Dunsmore, that means homes near Church of St Peter, among other places. A little further out are Marton Museum of Country Bygones (1.8 miles south-west) and Brandon Castle (3.6 miles north-west). Not far away are Ryton Wood Meadows and Hensborough Hill.
Places near Bourton on Dunsmore
More services for Bourton on Dunsmore
How to look after the repair
Once the work has cured, treat it gently:
- Keep metal cans and razors off the surface
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Make sure an acrylic bath is firm underfoot
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Common questions in Bourton on Dunsmore
Do you cover the whole of Warwickshire?
Across the UK, so Bourton on Dunsmore is covered. Our prices are the same everywhere.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Bourton on Dunsmore.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Landlord and trade work in Bourton on Dunsmore
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around Bourton on Dunsmore, we will quote for several properties at once. Just send photos for each address and we will price them together.
What a repair can’t fix
In fairness, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly before booking.
Materials we work on in Bourton on Dunsmore
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What we’re called out for in Bourton on Dunsmore
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
You may need us if you’ve spotted:
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
- Rust spots around the plughole
- Holes from dropped items
Before you book anyone
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- How to care for the finish
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
