Norfolk · England

Bath chip & crack repair in Bow Street, Norfolk

Chip and crack repairs to enamel, acrylic and cast iron baths in Bow Street, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Bow Street

About our bath repair in Bow Street

A typical bath repair is a few hours’ work, and you can usually bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and people most often call us about damage done while the bathroom was being fitted and scuffs and scratches in the surface.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Area
Bow Street (NR17)
County
Norfolk
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

About Bow Street

Bow Street is about 3 miles north-west of Attleborough, in Norfolk. Wherever you are in the NR17 postcode area, a technician comes to you. Our repair technicians cover all 797 towns and villages across Norfolk.

Here we cover the NR17 postcode area. Local streets include Hingham Road and Bow Street, and we cover them all. Other places close to Bow Street include Stalland Common (1 mile north), Great Ellingham (1 mile south), Anchor Corner (1 mile west), Little Ellingham (1 mile north-west) and Rockland St Peter (2 miles west). We also work in nearby towns such as Norwich (15 miles north-east), Thetford (13 miles south-west), Dereham (9 miles north), Wymondham (6 miles east), Attleborough (3 miles south-east) and Watton (6 miles west).

What’s near Bow Street

In Bow Street, that means homes near Church of St James, Great Ellingham Primary School and Attleborough Academy Norfolk. Bow Street’s nearest station is Attleborough station, roughly 2.9 miles south-east. A little further out are Morley Old Hall (2.3 miles east) and Bickley Day Hospital (2.5 miles south-east). Open spaces near Bow Street include Scoulton Mere.

Map of Bow Street © OpenStreetMap contributors

Repair or replace: which is better?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why Bow Street clients choose us

  • Technicians who travel to you, UK-wide
  • A year’s guarantee on all work
  • Nothing taken out or refitted
  • Same prices wherever you are

See our prices page or resurfacing vs replacement cost guide.

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What we cannot put right

Some jobs are not right for a repair, including:

  • Water coming from the waste or taps rather than the bath
  • Metal that has corroded all the way through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic

Bow Street: your questions answered

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How long before I can use the bath?

Generally the next day. We will tell you the exact curing time when we finish.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Is a holed acrylic bath repairable?

Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Prices and what affects them

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • Where the damage is and how we get to it
  • The material

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Send pictures for a quote

Phone pictures are fine. Make sure they show:

  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • A wider photo showing the whole bath

The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away if a repair is the right fix.

Aftercare tips

It’s all simple stuff:

  • Store metal items away from the bath
  • Clean with warm water and a mild detergent
  • If an acrylic bath flexes, have its feet adjusted
  • Get a dripping tap fixed promptly

A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

How the visit works

Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. Allow two to three hours for most chips.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work

Get a quote

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.