Dorset · England
Bath Repair in Bowridge Hill
Chip and crack repairs to enamel, acrylic and cast iron baths in Bowridge Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
Bath repair at your home in Bowridge Hill
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We regularly repair roll-top & freestanding, pressed steel enamel and acrylic, and people most frequently call us about snagging damage from a refit and a cracked acrylic bath.
All our work is covered by a one-year guarantee.
- Where
- Bowridge Hill (SP8)
- Area hub
- Dorset
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Bowridge Hill and the surrounding area
Bowridge Hill is about 11 miles south of Warminster, in Dorset. Whether you are in the middle of Bowridge Hill or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Bowridge Hill is one of 462 towns and villages in Dorset we cover.
We cover every part of the SP8 postcode area. If you’re just outside Bowridge Hill, we cover Colesbrook (1 mile west), Peacemarsh (1 mile south-west), Gillingham (1 mile south-west), Milton on Stour (1 mile north-west) and North End (2 miles east). Larger places within reach include Blandford Forum (14 miles south), Shaftesbury (5 miles south-east), Sherborne (13 miles south-west), Sturminster Newton (9 miles south), Milborne Port (10 miles south-west) and Stalbridge (8 miles south-west).
Landmarks near Bowridge Hill
Our clients here include homes close to The Red Lion pub, Gillingham School and Gillingham Primary School. For rail, the closest station is Gillingham (Dorset) station, roughly 1.1 miles south. Nearby you will also find Kings Court Palace (1 mile south) and Westminster Memorial Hospital (4.2 miles south-east). The countryside around Bowridge Hill includes White Sheet Hill.
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
Landlord and trade work in Bowridge Hill
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Bowridge Hill
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Common problems we fix in Bowridge Hill
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People usually call us after spotting something like this:
- A chipped rim or side
- Rust spots around the plughole
- Chips caused by builders
- A hole punched through by something heavy
Before booking anyone
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
What affects the price in Bowridge Hill
Prices start from £95. You will not pay by the hour. The price is based on:
- Unusual colours or finishes
- Where the damage is and how we get to it
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Before you send photos, these tips help us give you a firm price:
- One picture of the entire bath
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Natural light rather than flash
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Looking after it afterwards
Looking after the surface is easy:
- Stick to mild cleaners and a soft cloth
- Do not scrub with anything abrasive
- Put a towel in the bath if you’re working above it
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- Work done at your home or business
- CHAS and Constructionline accredited
Read our full price list or bath cost comparison.
Towns and villages near Bowridge Hill
What else we do in Bowridge Hill
Bowridge Hill: your questions answered
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
What areas do you cover?
The whole UK, including all of Dorset. Just include your postcode and we’ll offer you dates.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
About our accreditations · Every repair comes with a one-year guarantee.
