Dorset · England

Bath Repair for Peacemarsh homes

Bath repair in Peacemarsh without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Peacemarsh?

How we handle bath repair in Peacemarsh

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. If you are dealing with chips under the taps and a chipped rim or side, we can help, on whirlpool & spa baths, cast iron enamel and acrylic alike.

Every job is backed for twelve months. We return to put right any problem with the work.

Rusty chip next to a bath plughole, before and after repair
Location
Peacemarsh (SP8)
County
Dorset
Warranty
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Peacemarsh: your questions answered

Can you match an avocado or pink bath?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Is a holed acrylic bath repairable?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

What areas do you cover?

We cover the whole UK, including Peacemarsh and the rest of Dorset. Send your postcode with your photos and we’ll confirm dates.

Do you work in Peacemarsh?

We do. Repair technicians travel to Peacemarsh from across the region, with no extra charge for travel.

The process

We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift
  • Keep children and pets away from the room on the day

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Related advice

Should you replace it?

Many people think a damaged bath means a new one. Generally it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why choose Surface Doctor in Peacemarsh

  • Generally one visit, start to finish
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year

See our prices page or bath cost comparison.

Landlord and trade work in Peacemarsh

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Where we work around Peacemarsh

Peacemarsh is about 13 miles south of Frome, in Dorset. Anywhere in SP8, we come to you. Peacemarsh is one of 462 towns and villages in Dorset where we work.

Jobs in SP8 are booked in the same way as anywhere else. You’ll find streets such as Bay Road, Bay Lane and Wyke Road, and we cover them all. Neighbouring places we cover include Gillingham (1 mile south), Colesbrook (1 mile north), Bowridge Hill (1 mile north-east), Milton on Stour (1 mile north) and North End (2 miles east). We also work in nearby towns such as Blandford Forum (14 miles south), Shaftesbury (5 miles south-east), Sherborne (12 miles south-west), Sturminster Newton (8 miles south), Milborne Port (10 miles south-west) and Stalbridge (7 miles south-west).

Local landmarks in Peacemarsh

Typical jobs here are in homes near Gillingham Primary School, St Mary the Virgin and Gillingham School. The nearest railway station is Gillingham (Dorset) station, roughly 0.7 miles south of the centre. Further afield, we also cover the area around Gillingham Museum (0.5 miles south) and Westminster Memorial Hospital (4.3 miles south-east). Open spaces near Peacemarsh include White Sheet Hill.

Map of Peacemarsh © OpenStreetMap contributors

Signs you need bath repair in Peacemarsh

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Keep an eye out for these signs:

  • A chipped rim or side
  • An old repair that has yellowed or come loose
  • Chips under the taps
  • Deep scratches in acrylic

Comparing quotes

  • What the guarantee covers, and for how long
  • Whether the price covers travel
  • What aftercare is recommended
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

When we would advise against a repair

It helps to know what we can’t do:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

What bath repair costs

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • What kind of damage it is
  • The material and finish

The price reflects the work involved, not where you live. You will see the full price before booking.

Quotes from your photos

You can typically get a fixed quote without us visiting. To make it quick:

  • One picture of the entire bath
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • Details of any past repairs

Send us photos of the damage and a wider shot of the whole item, with your SP8 postcode, and we’ll come back with a fixed quote.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.