Buckinghamshire · England

Bath chip & crack repair in Bradenham, Buckinghamshire

Bath repair in Bradenham without the cost of replacing. Send us pictures for a fixed quote, then book a visit.

  • Repairs from £95
  • Rusty patches near the plughole
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Bradenham

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Bath repair in Bradenham, done in place

Most of our bath repairs take a few hours, and you can generally bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. We regularly repair whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and the jobs we see most are damage beneath the taps and chips caused by builders.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Bradenham (HP14)
Region
Buckinghamshire
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

How we price bath repair

Prices start from £95. There’s no charge for travel to Bradenham. The price depends on:

  • How easy the damage is to reach
  • How many areas need work
  • Any earlier repairs that need removing first
  • How many items we do on one visit

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • Natural light rather than flash
  • The material, if you know it
  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

What happens on the day

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Make sure the area is dry
  • Clear the area around the damage
  • Let us know about parking or access

Ask for a price

To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Read more

When to call us in Bradenham

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.

The most common problems we are called about are:

  • An old repair that has yellowed or come loose
  • A chipped rim or side
  • A cracked acrylic bath
  • Scratches you can feel with a fingernail

Questions to ask before you book

  • How long it needs to cure
  • Is the price fixed, and does it include VAT?
  • What happens if they find more damage
  • Whether the colour is mixed to match

Our hiring checklist

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Fix dripping taps early to stop staining and limescale
  • Avoid scourers, wire wool and gritty cream cleaners
  • Clean with warm water and a mild detergent
  • Do not leave razors or cans standing in the bath

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Covering Bradenham

Bradenham is about 4 miles north-west of High Wycombe, in Buckinghamshire. Customers in Bradenham get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 263 places in Buckinghamshire, from the larger towns to small villages. Our nearest city page is London, about 33 miles away.

All of HP14 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Saunderton (1 mile north-west), West Wycombe (1 mile south), Green End (2 miles south-west), Bledlow Ridge (2 miles west) and Saunderton Lee (2 miles north-west). Larger places within reach include Aylesbury (10 miles north), High Wycombe (4 miles south-east), Chesham (9 miles east), Marlow (7 miles south), Amersham (9 miles east) and Beaconsfield (8 miles south-east).

What’s near Bradenham

Around Bradenham, we work in homes near Naphill and Walters Ash School, Church of St Botolph and The Red Lion pub and the streets around them. The closest station to Bradenham is Saunderton station, about 1.1 miles north-west. Well-known places in the area include Eden (3.3 miles south-east) and Wycombe Hospital (3.5 miles south-east). For a walk, there’s Yoesden.

  • Local facilities include West Wycombe Rural (1.7 miles south-west)
Map of Bradenham © OpenStreetMap contributors

What a repair cannot fix

To be straight with you, there are a few things a repair won’t fix:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Bradenham

  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Repairing versus replacing in Bradenham

Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • Colour-matched on site
  • One-year guarantee on every repair
  • CHAS and Constructionline accredited
  • Same prices wherever you are

Read our pricing and resurfacing vs replacement cost guide.

Common questions in Bradenham

Is a cracked acrylic bath repairable?

Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Can you repair something that’s been repaired before?

Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.

Can rust on a bath be repaired?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.