Buckinghamshire · England
Bath chip & crack repair in Green End, Buckinghamshire
Fixed-price bath repair in Green End and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Scratches you can feel with a fingernail
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A fixed quote before you book
- Everything repaired in place
- Dust sheets down, tidy finish
- No extra charge for your area
Read our full price list or resurfacing vs replacement cost guide.
Bath repair in Green End without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include an old repair that has yellowed or come loose and impact holes in acrylic, across pressed steel enamel, acrylic and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Green End (HP14)
- Region
- Buckinghamshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Green End
Other services in Green End
What affects the price in Green End
Prices start from £95. There is no area surcharge for Green End. The price reflects:
- The type of damage
- How many items we do on one visit
- The colour and finish to match
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Green End. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Your postcode, so we can check dates
Most customers in Green End get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Your questions about bath repair in Green End
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Landlord and trade work in Green End
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
What happens on the day
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Green End and nearby
Green End is about 4 miles north-west of High Wycombe, in Buckinghamshire. Across the HP14 area, a technician comes to you. Green End is one of 263 places in Buckinghamshire where we work. We work right across the region, from Green End to London (34 miles away).
Our visits in HP14 work the same way as everywhere else we cover. We also cover the places around Green End: Studley Green (1 mile south-west), The City (1 mile north-west), Beacon's Bottom (1 mile west), Horsleys Green (1 mile south-west) and Piddington (1 mile south-east). Within a short drive, we also cover Aylesbury (11 miles north), High Wycombe (4 miles south-east), Chesham (11 miles east), Marlow (6 miles south-east), Amersham (10 miles east) and Beaconsfield (9 miles east).
What’s near Green End
Our clients here include homes close to Studley Arms and The Mary Towerton School At Studley Green, among other places. Green End’s nearest station is Saunderton station, about 1.7 miles north-east. Nearby you’ll also find High Wycombe Castle (4.3 miles east) and Wycombe Hospital (4.2 miles south-east). Open spaces near Green End include Bald Hill and Yoesden.
- Parks and local facilities nearby include West Wycombe Rural (0.9 miles south-east)
About our accreditations · Every repair comes with a one-year guarantee.
