Edinburgh · Scotland
Bath Repair in Braepark
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Braepark, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Rusty patches near the plughole
Bath repair in Braepark without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Common call-outs are for a cracked acrylic bath and scuffs and scratches in the surface, across pressed steel enamel, acrylic and roll-top & freestanding.
You get a one-year guarantee, the same in Braepark as everywhere else we work.
- Location
- Braepark (EH4, EH12, EH30)
- Region
- Edinburgh
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Braepark
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How we price bath repair
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- How easy the damage is to reach
- Whether we combine several jobs
- How much damage there is
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Your postcode, so we can check dates
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly before booking.
Materials we work on in Braepark
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Covering Braepark
Braepark is about 4 miles west of Edinburgh, in Edinburgh. Our repair technicians come to customers in Braepark and the surrounding area, so there’s no workshop to go to. Braepark is one of 175 towns and villages in Edinburgh where we work.
Jobs in EH4, EH12 and EH30 are booked in the same way as anywhere else. Jobs here include addresses on Avon Road, Essex Road and Braehead Road and the roads around them. If you are just outside Braepark, we cover Barnton (1 mile south), Cramond (1 mile east), Cammo (1 mile south-west), Bughtlin (1 mile south) and East Craigs (1 mile south). Within a short drive, we also cover Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (5 miles east), Broughton (5 miles east) and Bellevue (4 miles east).
Landmarks near Braepark
We visit homes around Edinburgh and Craigmount High School. For rail, the closest station is Edinburgh Gateway station, about 1.8 miles south of the centre. Nearby you’ll also find The Gyle Shopping Centre (1.9 miles south) and Corstorphine Hospital (2.1 miles south-east). The countryside around Braepark includes Corstorphine Hill and Dundas Loch.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Rinse the bath after use, especially in hard water areas
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Store metal items away from the bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Do you need bath repair in Braepark?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
The things clients typically mention when they call include:
- Deep scratches in acrylic
- Cracks in an acrylic bath
- Chips under the taps
- Holes from dropped items
Comparing quotes
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- Who turns up on the day
- How to look after the finish
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes a few hours, depending on the damage in most cases. We leave the room clean.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
How to get a price
Upload photos of the damage and a wider shot of the whole item, and tell us you are in Braepark, and we will come back with a fixed quote.
Advice
Braepark: your questions answered
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
What does bath repair cost?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
What areas do you cover?
All of Edinburgh, and the rest of the UK. Travel is included in the price.
Other services in Braepark
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
