Edinburgh · Scotland

Bath chip & crack repair in Barnton, Edinburgh

Problem with your bath in Barnton? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Rust spots around the plughole
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Barnton

What a repair cannot fix

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Metal that has corroded all the way through
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding

About our bath repair in Barnton

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most often call us about rusty patches near the plughole and a hole punched through by something heavy.

Big or small, you get the same one-year guarantee in Barnton and across Edinburgh.

Area
Barnton (EH4, EH12)
Region
Edinburgh
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Questions from Barnton

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is a holed acrylic bath repairable?

Often, if there’s access underneath. The hole is backed, filled and refinished to match.

Which areas do you work in?

Everywhere in the UK, Barnton included. Travel is included in the price.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Can you repair something that is been repaired before?

Yes, regularly. It can add a little time, which we include in the quote.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Is a cracked acrylic bath repairable?

Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.

Aftercare tips

It’s all simple stuff:

  • Do not scrub with anything abrasive
  • Do not leave razors or cans standing in the bath
  • Don’t leave a fresh chip for long
  • Rinse the bath after use, especially in hard water areas

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.

Landlords, agents and businesses in Barnton

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

For anyone letting property in or around Barnton, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Common problems we fix in Barnton

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

If you can see any of these, send us a picture:

  • A chip where the taps sit
  • Deep scratches in acrylic
  • Impact holes in acrylic
  • A cracked acrylic bath

What your quote should include

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • What happens if they find more damage
  • How to care for the finish

10 questions to ask before booking

How it works

The work is clean and fairly quiet. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat
  • Keep children and pets away from the room on the day

Getting a price

For a price in Barnton, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Advice

Barnton and the surrounding area

Barnton is about 4 miles west of Edinburgh, in Edinburgh. Whether you are in the middle of Barnton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 175 towns and villages across Edinburgh.

Jobs in EH4 and EH12 are booked in the same way as anywhere else. Streets in the area include Avon Road, Cammo Road and Essex Road, all of which we cover. We also travel to Braepark (1 mile north), Cammo (1 mile south-west), Cramond (1 mile north-east), Bughtlin (1 mile south) and East Craigs (1 mile south). Within a short drive, we also cover Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (5 miles east), Broughton (5 miles east) and Bellevue (4 miles east).

Landmarks near Barnton

We visit homes around Edinburgh and Craigmount High School. The closest station to Barnton is Edinburgh Gateway station, about 1.6 miles south of the centre. Well-known places in the area include Corstorphine Hospital (1.9 miles south-east) and The Gyle Shopping Centre (1.7 miles south). Green spaces nearby include The New Leaf Co-op and Corstorphine Hill.

Map of Barnton © OpenStreetMap contributors

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

How we price bath repair

Repairs from £95. We charge the same across the UK, including Barnton. The price reflects:

  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • Whether we combine several jobs
  • The size and number of damaged areas

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what to send:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • A clear, close picture of the problem area

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.