Doncaster · England
Bath chip & crack repair in Braithwaite, Doncaster
Our technicians come to Braithwaite for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Chips along the edge of the bath
How we handle bath repair in Braithwaite
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. Typical jobs include deep scratches in acrylic and damage done while the bathroom was being fitted, in cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Braithwaite (DN7)
- Area hub
- Doncaster
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Landlord and trade work in Braithwaite
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Have somewhere for us to park nearby if possible
Get a quote
Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Braithwaite, and we’ll reply with a fixed price.
Advice
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Braithwaite
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- A fixed quote before you book
See our full price list and guide to resurfacing and replacement costs.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Aftercare tips
So the finish stays in good condition:
- Have new chips seen to early
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What bath repair costs
Prices start from £95. We price every job individually, from your photos. What matters most is:
- How many areas need work
- Access to the area
- Doing more than one item at once
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Braithwaite questions
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
How do I get a price for bath repair in Braithwaite?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Places near Braithwaite
More services for Braithwaite
Our work in Braithwaite
Braithwaite is about 4 miles west of Thorne, in Doncaster. We travel to clients in Braithwaite and nearby villages, so nothing has to leave your home. Braithwaite is one of 89 towns and villages in Doncaster we cover. You can also see our page for Leeds, about 24 miles away.
Jobs in DN7 are booked in the same way as anywhere else. Whether you live on Braithwaite Lane, Top Lane and Low Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Kirkhouse Green (1 mile north), Far Bank (2 miles east), Fishlake (2 miles east), Sykehouse (3 miles north) and Topham (3 miles north). Larger places within reach include Doncaster (7 miles south), Adwick le Street (6 miles south-west), Thorne (4 miles east), Conisbrough (11 miles south-west), Bentley (5 miles south-west) and Armthorpe (5 miles south).
Landmarks near Braithwaite
We visit homes around Church of St Mary. The nearest railway station is Hatfield & Stainforth station, roughly 2.1 miles south-east of the centre. Further afield, we also cover the area around Doncaster Royal Infirmary (5.5 miles south). Green spaces nearby include Thorpe Marsh Nature Reserve.
Common problems we fix in Braithwaite
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
These are the problems we are asked about most:
- Rusty patches near the plughole
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- Chips under the taps
Comparing quotes
- What the guarantee covers, and for how long
- Aftercare advice
- How long it needs to cure
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
