Doncaster · England
Bath chip & crack repair in Kirkhouse Green, Doncaster
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kirkhouse Green and across Doncaster. Free, fixed quotes from your pictures.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Bath repair in Kirkhouse Green, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are a failed DIY repair that’s discoloured or lifting and damage beneath the taps.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Kirkhouse Green (DN7)
- County
- Doncaster
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Kirkhouse Green
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Kirkhouse Green
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- What kind of damage it is
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How hard the colour is to match
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Where you are, by postcode
- A clear, close picture of the problem area
- The material, if you know it
- One picture of the entire bath
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we’re there.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Rinse it down after each bath
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Our work in Kirkhouse Green
Kirkhouse Green is about 4 miles west of Thorne, in Doncaster. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kirkhouse Green is one of 89 places in Doncaster we cover. You can also see our page for Leeds, about 24 miles away.
Every address in DN7 is within our area, from the main roads to the quietest streets. Whether you live on Kirkhouse Green Road and Moss Road or a nearby road, we can come to you. We also cover the places around Kirkhouse Green: Braithwaite (1 mile south), Far Bank (1 mile east), Fishlake (2 miles east), Sykehouse (2 miles north) and Topham (2 miles north). Within a short drive, we also cover Doncaster (7 miles south), Adwick le Street (6 miles south-west), Thorne (4 miles east), Conisbrough (12 miles south-west), Bentley (6 miles south-west) and Armthorpe (6 miles south).
Around Kirkhouse Green
The closest station to Kirkhouse Green is Hatfield & Stainforth station, roughly 2.4 miles south-east of the centre. Green spaces nearby include Thorpe Marsh Nature Reserve.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Kirkhouse Green
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Do you cover Kirkhouse Green?
Yes. We work across the UK and come to Kirkhouse Green. Send photos and we will quote, or call 0345 017 0787.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Nearby places to Kirkhouse Green
Also in Kirkhouse Green
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why choose Surface Doctor in Kirkhouse Green
- Straight answers about what a repair can do
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
See our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
