Buckinghamshire · England
Bath Repair for Brill homes
We travel to Brill for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Hairline or through cracks in acrylic
Bath repair at your home in Brill
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. If you are dealing with damage done while the bathroom was being fitted and scuffs and scratches in the surface, we can generally put it right, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Location
- Brill (HP18)
- County
- Buckinghamshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we price bath repair
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your pictures
You can typically get a fixed quote without us visiting. To make it quick:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- One picture of the whole bath
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
What else we do in Brill
Should you replace it?
People often assume a cracked or chipped bath has to come out. Usually it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Read our full price list and guide to resurfacing and replacement costs.
Where we work around Brill
Brill is about 6 miles north-west of Thame, in Buckinghamshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Brill is one of 263 towns and villages in Buckinghamshire where we work. Our jobs stretch from Brill to London (47 miles away).
Our visits in HP18 are booked in the same way as anywhere else. From High Street, The Square and Brae Hill or anywhere nearby, a technician can come to you. Neighbouring places we cover include Little London (1 mile south-west), Oakley (1 mile south-west), Piddington (2 miles north), Ludgershall (2 miles north) and Blackthorn (4 miles north-west). Further out, we also cover Aylesbury (10 miles east), Buckingham (13 miles north), Elmhurst (10 miles east), Southcourt (10 miles east), Princes Risborough (12 miles south-east) and Haydon Hill (9 miles east).
What’s near Brill
Typical jobs here are in homes near The Red Lion pub, United Reformed Church and Brill Church of England School. For a walk, there is Bernwood Meadows.
Signs you need bath repair in Brill
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Common reasons people in Brill contact us are:
- Deep scratches in acrylic
- Rusty patches near the plughole
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- When it can be used again
When we’d advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Check that an acrylic bath does not move when you stand in it
- Clean with warm water and a mild detergent
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Ask for a price
For a price in Brill, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Questions from Brill
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Are there extra charges for Brill?
We don’t add a call-out fee. Your fixed price includes everything.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How do I get a price for bath repair in Brill?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
