Oxfordshire · England
Bath Repair for Thame homes
Our repair technicians come to Thame for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- Holes from dropped items
Bath repair at your home in Thame
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Whether it’s impact holes in acrylic and rust spots around the plughole, we can help.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Location
- Thame (OX9)
- Area hub
- Oxfordshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Thame
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is a holed acrylic bath repairable?
Generally. Photos of the hole and the underside help us check.
Do you come to Thame?
Yes, we do. Technicians travel to Thame from across the region, and the price is the same as everywhere else.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What happens after I send pictures?
We come back with a fixed price. There’s no obligation to book.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
How we price bath repair
Repairs from £95. There’s no area surcharge for Thame. The price reflects:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- The size and number of damaged areas
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Details of any past repairs
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Common problems we fix in Thame
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
The most common problems we’re called about are:
- Chips under the taps
- Chips caused by builders
- A chipped rim or side
- Impact holes in acrylic
Questions to ask before booking
- What prep work is covered
- Whether the colour is mixed to match
- How soon you can use it again
- How your room will be protected
More services for Thame
Our work in Thame
Thame is about 8 miles south-west of Aylesbury, in Oxfordshire. Across the OX9 area, we carry out the work at your property. Thame is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is London, about 41 miles away.
Our technicians cover all of OX9. From Upper High Street, Butter Market and High Street or a nearby road, we can come to you. With the A329 and A418 close by, Thame is easy for our technicians to reach. Other places close to Thame include Moreton (1 mile south-west), Towersey (1 mile east), Kingsey (2 miles east), Long Crendon (2 miles north-west) and Haddenham (3 miles north-east). Larger places within reach include Oxford (11 miles west), Didcot (15 miles south-west), Bicester (13 miles north-west), Abingdon-on-Thames (14 miles west), Henley-on-Thames (15 miles south) and Kidlington (14 miles west). Thame is among the bigger towns we cover in Oxfordshire.
What’s near Thame
Our customers here include homes close to Barley Hill Primary School, Church of St Mary and Cross Keys Public House, among other places. The closest station to Thame is Haddenham & Thame Parkway station, about 2.1 miles north-east of the centre. Well-known places in the area include Thame Museum (0.5 miles north-west) and Thame Community Hospital (less than half a mile south-east). Open spaces near Thame include Snakemoor.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. Typically it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Fixed prices from your pictures
- Rooms protected and left tidy
- Most jobs done in one visit
- One-year guarantee on every repair
Take a look at our prices page and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Landlord and trade work in Thame
Landlords, letting agents and housing providers in Thame use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
