Herefordshire · England
Bath chip & crack repair in Bromyard, Herefordshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bromyard, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Impact holes in acrylic
Bath repair at your home in Bromyard
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Common call-outs are for damage done while the bathroom was being fitted and chips on the rim or sides, across roll-top & freestanding, pressed steel enamel and cast iron enamel.
All our work comes with a one-year guarantee, wherever you are in Herefordshire.
- Area
- Bromyard (HR7)
- Region
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
To keep it looking its best for years:
- Do not leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Free fixed quotes from pictures
- Nothing taken out or refitted
- One price list for the entire UK
- Rooms protected and left tidy
See our full price list and guide to resurfacing and replacement costs.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
More services for Bromyard
Landlords, agents and businesses in Bromyard
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Bromyard: your questions answered
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What happens next?
You will get a fixed quote back, plus dates. There’s no obligation to book.
About Bromyard
Bromyard is about 9 miles north-west of Great Malvern, in Herefordshire. Anywhere in HR7, a technician comes to you. Bromyard is one of 255 places in Herefordshire where we work. Our jobs stretch from Bromyard to Birmingham (33 miles away).
Postcode districts we cover here: HR7. You will find streets such as High Street, Clover Terrace and Old Road, and we cover them all. You will find Bromyard on the A44 and A465, so it’s easy for us to reach. If you’re just outside Bromyard, we cover Stoke Lane (3 miles south), Bredenbury (3 miles west), Stoke Cross (3 miles south-west), Stanford Bishop (3 miles south-east) and Pencombe (3 miles west). Larger places within reach include Hereford (13 miles south-west), Ledbury (11 miles south), Leominster (10 miles west), Redhill (14 miles south-west), Newton Farm (14 miles south-west) and Whitecross (13 miles south-west).
Local landmarks in Bromyard
Our clients here include homes close to St Peter's Primary School, Rose and Lion pub and Church of St Peter, among other places. Nearby you will also find Edvin Loach Ringwork (2.5 miles north) and The Time Machine Museum of Science Fiction (less than half a mile east). Not far away are Page's Pasture.
Do you need bath repair in Bromyard?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Contact us if you’ve noticed any of these:
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- A chipped rim or side
- A hole punched through by something heavy
What your quote should include
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
- What preparation is included
- How to look after the finish
When we would advise against a repair
In fairness, some problems need a different fix:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
